Abstract:Abstract.A general method is presented for the rigorous solution of Eshelby’s problem concerned with an arbitrary shaped inclusion embedded within one of two dissimilar elastic half-planes in plane elasticity. The bonding between the half-planes is considered to be imperfect with the assumption that the interface imperfections are uniform.Using analytic continuation, the basic boundary value problem is reduced to a set of two coupled nonhomogeneous first-order differential equations for two analytic functions defined in the lower half-plane which is free of the thermal inclusion. Using diagonalization, the two coupled differential equations are decoupled into two independent nonhomogeneous first-order differential equations for two newly defined analytic functions. The resulting closed-form solutions are given in terms of the constant imperfect interface parameters and the auxiliary function constructed from the conformal mapping which maps the exterior of the inclusion onto the exterior of the unit circle.The method is illustrated using several examples of an imperfect interface. In particular, when the same degree of imperfection is realized in both the normal and tangential directions between the two half-planes, a thermal inclusion of arbitrary shape in the upper half-plane does not cause any mean stress to develop in the lower half-plane. Alternatively, when the imperfect interface parameters are not equal, then a nonzero mean stress will be induced in the lower half-plane by the thermal inclusion of arbitrary shape in the upper half-plane. Detailed results are presented for the mean stress and the interfacial normal and shear stresses caused by a circular and elliptical thermal inclusion, respectively. Results from these calculations reveal that the imperfect bonding condition has a significant effect on the internal stress field induced within the inclusion as well as on the interfacial normal and shear stresses existing between the two half-planes especially when the inclusion is near the imperfect interface.

Circular Inhomogeneity with Viscoelastic Interface under Antiplane Shear

Interaction Between a Screw Dislocation and a Circular Inhomogeneity with an Interfacial Crack in Viscoelastic Media

Spherical nano-inhomogeneity with the Steigmann-Ogden interface model under general uniform far-field stress loading

Frequency Domain Homogenization of Effective and Localized Viscoelastic Response of Unidirectional Composites with Imperfect Interfaces

Viscoelastic Interaction Between A Screw Dislocation and A Circular Interfacial Rigid Line

The behavior of angle-ply laminated cylindrical shells with viscoelastic interfaces in cylindrical bending

Interface Stress Around a Nanosized Spherical Inhomogeneity under Asymmetric Dynamic Loads

Shape of a single inclusion enclosing uniform stress for a non-uniform far-field loading in anti-plane shear

Anti-plane eigenstrain problem of an inclusion of arbitrary shape in an anisotropic bimaterial with a semi-infinite interface crack

Elastic fields in two imperfectly bonded half-planes with a thermal inclusion of arbitrary shape

On a diffuse interface model for incompressible viscoelastic two-phase flows

An elliptical inhomogeneity under nonuniform heat flux

Dynamic stress analysis of elliptical inclusions in an inhomogeneous medium with modulus and density variations under the action of shear horizontal (SH) waves

A crack in a confocal elliptical inhomogeneity embedded in an infinite matrix subjected to uniform heat flux

Efficient Numerical Modeling of Hertzian Line Contact for Material With Inhomogeneities

Stress Fields of A Spheroidal Inhomogeneity with an Interphase in an Infinite Medium under Remote Loadings

Homogenization of a viscoelastic matrix in linear frictional contact

New micromechanical model in time domain for linear viscoelastic composites with ellipsoidal reinforcements

Antiplane Interaction of a Crack with a Circular Inclusion in an Elastic Half Plane

On time-dependent behavior of cross-ply laminated strips with viscoelastic interfaces

Solutions of the elastic fields in a half-plane region containing multiple inhomogeneities with the equivalent inclusion method and the applications to properties of composites