Abstract:A composite titania thin film consisted of quasi-aligned single-crystalline rutile nanorods embedded in sol-gel-derived anatase aggregates was fabricated and its photoelectrochemical behavior was studied in detail. A monolayer of nearly sing I e-crystal line rutile nanorods was first deposited on metallic Ti substrates through a controlled reaction between Ti and hydrogen peroxide. The gaps among the rutile nanorods were then filled with titania nanoparticles through a sol-gel dip-coating approach, which achieved a composite thin film of single-crystalline rutile nanorods embedded in anatase aggregates, after a subsequent thermal treatment at 723 K. The X-ray diffraction measurement revealed that the composite film with thickness of 180 nm contained anatase and rutile in a nearly 50:50 ratio. The UV-visible diffusive reflectance spectra estimated a band gap of 2.99 eV for the rutile monolayer and a slightly increased value of 3.03 eV for the composite film due to the embedding of the anatase nanoparticles. Photocurrent versus potential diagrams, photocurrent transient curves, and open-circuit potential measurement supported the fact that the anatase nanoparticles possessed better inherent photoelectrochemical properties than rutile. However, electrochemical impedance spectra characterization, together with photocurrent transient curves and open-circuit potential measurement, suggests that the single-crystalline rutile nanorods exhibited a higher electron-transfer rate. The combination of the two components in such an appropriate way enhanced significantly the charge separation effect arising from the anatase/rutile couple, which hence combined efficiently the "mixed crystal effect" and the "mixed morphological effect". A steady-state photocurrent more than double the simple sum of those generated by the two components alone was detected for the current composite film, which can be attributed to the single-crystalline rutile nanorods that provide channels for rapid electron transfer to the conductive Ti substrates under an applied bias potential. As a result, this study concludes that the present nanostructure magnified significantly the well-established mixed crystal effect, that is, an enhanced charge separation arising from a mixture of anatase and rutile.

Nanocomposites Based on Rutile-Tio2 and Polyaniline

Novel polyaniline-LiNi0.5La0.02Fe1.98O4 nanocomposites prepared via an in situ polymerization

Preparation and Characterization of Polyaniline/Mmt Conductive Composites

Synthesis of Conducting Polyaniline/tio2 Composite Nanofibres by One‐step in Situ Polymerization Method

Surface Modification of TiO2 Nanoparticles by Polyaniline

Novel polyaniline/titanium nitride nanocomposite: controllable structures and electrical/electrochemical properties.

Synthesis and Characterization of Polyaniline/carbon Nanotube Composites

Synthesis, characterization, material properties and sensor application study of polyaniline/niobium doped titanium dioxide nanocomposites

Surface properties of polyaniline/nano-TiO2 composites

IN-SITU POLYMERIZATION OF POLYANILINE/CARBON NANOTUBE COMPOSITE

Synthesis and Characterization of Polyaniline-Based Polymer Nanocomposites as Anti-Corrosion Coatings

Enhanced Photoelectrochemical Response of a Composite Titania Thin Film with Single-Crystalline Rutile Nanorods Embedded in Anatase Aggregates

Synthesis and Electrochemical Characteristics of Polyaniline-MnO2 Nanocomposites

Synthesis of Polyaniline-Mwnt Composite Nano-Tube and Electrical and Optical Properties

In-situ synthesis and characterization of polyaniline -CaCu3Ti4O12 nano crystal composites

Preparation of Conductive Polyaniline/Functionalized Titanium Dioxide Nanocomposites Via Graft Polymerization

Development of polyaniline/chitosan (PANI/CTS) and TiO2-PANI/CTS nanocomposites as anti-corrosion coatings: Synthesis and characterization

Composites of Nanotubular Polyaniline Containing Fe3O4 Nanoparticles

Tubular composite of doped polyaniline with multi-walled carbon nanotubes

The Nanocomposite Of Polyaniline And Nitrogen-Doped Layered Htinbo5 With Excellent Visible-Light Photocatalytic Performance

Nano Na-Montmorillonite @ Polyaniline Hybrid Composite: Effect of Nano Na-Montmorillonite Content on Structure, Thermal Stability and Electrical Properties