Abstract:Progressive collapse of building structures has been a hot research topic since the September 11, 2001, terrorist attacks. These works provide valuable information focused more on beam-column connections and two-dimensional (2D) substructures, and relative studies on three-dimensional (3D) structures are limited, especially high-quality experimental tests on 3D composite floor systems. As is known, external columns are entirely exposed to the outside environment, which makes them more susceptible to be damaged by extreme events like vehicular impact or explosion, as observed in the collapse of the Alfred P. Murrah Federal Building in Oklahoma City in 1995. In this study, two 1=3-scale 3D specimens with four types of connections, including web unreinforced flange bolted (WUFB) connection, fin plate (FP) connection, reduced beam section (RBS) connection, and double angle cleat (DAC) connection, were tested quasi-statically up to failure under external column removal scenarios. Based on the test results, the vertical load-displacement curves, failure modes, deflection profile, and strain development of the structural components were obtained and discussed in detail. The reaction force redistribution in the remaining columns and surrounding restraints was also investigated. Special attention was paid to the contributions of the main load-resisting mechanisms, namely, flexural action (FA), catenary action (CA), and tensile membrane action (TMA), on resisting progressive collapse. The analysis results suggest that, after the failure of an external column, FA would dominate in resisting progressive collapse. Although TMA does contribute to the mitigation of progressive collapse at the large-deformation stage, it plays a secondary role because the total load carrying capacity has already been severely deteriorated. By contrast, CA might be negligible. DOI: 10.1061/(ASCE)ST.1943541X.0002805. (c) 2020 American Society of Civil Engineers.

A review on the progressive collapse and control design of building structures

A review on progressive collapse study for large-span space structures

Overview of Analysis and Design Approaches for Progressive Collapse of Structures

STUDY ON THE DESIGN METHODS TO RESIST PROGRESSIVE COLLAP- SE FOR BUILDING STRUCTURES

Concept design of progressive collapse for long-span space structures

Current Trends and Developments in Progressive Collapse Research on Reinforced Concrete Flat Plate Structures

Research and Practice on Progressive Collapse and Robustness of Building Structures in the 21st Century

Progressive collapse of steel structures exposed to fire: A critical review

Methods of Assessing Progressive Collapse-Resisting Capacity

Research progress on progressive collapse resistant analysis and design of building structures under blast loading

Numerical Simulation and Design of Progressive Collapse of Steel Frame Composite Structures Considering Falling-Floors Impact

CONCEPT DESIGN OF PROGRESSIVE COLLAPSE OF STRUCTURES

Overview of analysis approaches in preventing progressive collapse of building structure

Parametric analysis of progressive collapse in high-rise buildings

Progressive Collapse of Steel High-Rise Buildings Exposed to Fire: Current State of Research

A REVIEW ON PROGRESSIVE COLLAPSE STUDY OF TIMBER STRUCTURES

The Influence of Joints and Composite Floor Slabs on Effective Tying of Steel Structures in Preventing Progressive Collapse

Design method and analysis of national standards for steel structures against progressive collapse

A Review on the Progressive Collapse Analysis of Reinforced Concrete Frame Structures

Progressive Collapse of 3D Composite Floor Systems with Rigid Connections under External Column Removal Scenarios

Development of American Building Progressive Collapse Design Criteria