Abstract:Immunochromatographic test strips typically consist of sample pad, conjugate pad, nitrocellulose membrane, and absorbent pad. Even minute variations in the assembly of these components can lead to inconsistent sample-reagent interactions, thereby reducing reproducibility. In addition, the nitrocellulose membrane is susceptible to damage during assembly and handling. To address this issue, we propose to replace the sample pad, conjugate pad, and nitrocellulose membrane with hierarchical dendritic gold nanostructure (HD-nanoAu) films to develop a compact integrated immunochromatographic strip. The strip uses quantum dots as a background fluorescence signal and employs fluorescence quenching to detect C-reactive protein (CRP) in human serum. A 5.9 μm thick HD-nanoAu film was electrodeposited on an ITO conductive glass by the constant potential method. The wicking kinetics of the HD-nanoAu film was thoroughly investigated, and the results indicated that the film exhibited favorable wicking properties, with a wicking coefficient of 0.72 μm ms-0.5. The immunochromatographic device was fabricated by etching three interconnected rings on HD-nanoAu/ITO to designate sample/conjugate (S/C), test (T), and control (C) regions. The S/C region was immobilized with mouse anti-human CRP antibody (Ab1) labeled with gold nanoparticles (AuNPs), while the T region was preloaded with polystyrene microspheres decorated with CdSe@ZnS quantum dots (QDs) as background fluorescent material, followed by mouse anti-human CRP antibody (Ab2). The C region was immobilized with goat anti-mouse IgG antibody. After the samples were added to the S/C region, the excellent wicking properties of the HD-nanoAu film facilitated the lateral flow of the CRP-containing sample toward the T and C regions after binding to AuNPs labeled with CRP Ab1. In the T region, CRP-AuNPs-Ab1 formed sandwich immunocomplexes with Ab2, and the fluorescence of QDs was quenched by AuNPs. The ratio of fluorescence intensity in the T region to that in the C region was used to quantify CRP. The T/C fluorescence intensity ratio was negatively correlated with the CRP concentration in the range of 26.67-853.33 ng mL-1 (corresponding to 300-fold diluted human serum), with a correlation coefficient (R2) of 0.98. The limit of detection was 15.0 ng mL-1 (corresponding to 300-fold diluted human serum), and the range of relative standard deviation: 4.48-5.31%, with a recovery rate of 98.22-108.33%. Common interfering substances did not cause significant interference, and the range of relative standard deviation: 1.96-5.51%. This device integrates multiple components of conventional immunochromatographic strips onto a single HD-nanoAu film, resulting in a more compact structure that improves the reproducibility and robustness of detection, making it promising for point-of-care testing applications.

An Electrochemical Immunosensor for Assays of C-Reactive Protein

Reusable Gold Nanoparticle Enhanced QCM Immunosensor for Detecting C-reactive Protein

Electrochemical detection of C-reactive protein using Copper nanoparticles and hybridization chain reaction amplifying signal

Electrochemical Impedance Immunosensor Based on Three-Dimensionally Ordered Macroporous Gold Film.

A facile indole probe for ultrasensitive immunosensor fabrication toward C-reactive protein sensing

Electrochemical Immunosensor for Casein Based on Gold Nanoparticles and Poly(L-Arginine)/Multi-Walled Carbon Nanotubes Composite Film Functionalized Interface

Electrochemical biosensor with electrokinetics-assisted molecular trapping for enhancing C-reactive protein detection

A Renewable Amperometric Immunosensor for CRP Based on Magnetic Nano Particles Modified Screen Printed Electrode

Reagent-free anti-fouling electrochemical immunosensor based on AL-BSA/AuNPs/PANI coating for the point-of-care detection of C-reactive protein in plasma and whole blood

The Fabrication of a Probe-Integrated Electrochemiluminescence Aptasensor Based on Double-Layered Nanochannel Array with Opposite Charges for the Sensitive Determination of C-Reactive Protein

Ultrasensitive electrochemical immunosensor for the detection of C-reactive protein antigen

Enzyme-free immunoassay for rapid, sensitive, and selective detection of C-reactive protein

Fabrication of a Novel Electrochemical Immunosensor Based on the Gold Nanoparticles/colloidal Carbon Nanosphere Hybrid Material

A Visual Distance-Based Capillary Immunoassay Using Biomimetic Polymer Nanoparticles for Highly Sensitive and Specific C-Reactive Protein Quantification

Biomimetic -mineralized multifunctional nanoflowers for anodic-stripping voltammetric immunoassay of rehabilitation-related proteins

Electrostatic Nanocage-Confined Probe for Electrochemical Detection of CA19-9 in Human Serum.

An integrated immunochromatographic device for C-reactive protein detection using hierarchical dendritic gold nanostructure films

Rapid and Convenient Single-Chain Variable Fragment-Employed Electrochemical C-Reactive Protein Detection System

Electrochemical immunosensor for simultaneous detection of dual cardiac markers based on a poly(dimethylsiloxane)-gold nanoparticles composite microfluidic chip: a proof of principle.

Proximity hybridization-regulated electrochemical stripping of silver nanoparticles via nanogold induced deposition for immunoassay.

An Aptasensor Based on the Microscopic Enumeration of Encoding Gold Nanoparticles for the Detection of C-reactive Protein.