Abstract:Due to its excellent electrical conductivity, high transparency in the visible spectrum, and exceptional chemical stability, indium tin oxide (ITO) has become a crucial material in the fields of optoelectronics and nanotechnology. This article provides a thorough analysis of growing ITO thin films with various thicknesses to study the impact of thickness on their electrical, optical, and physical properties for solar-cell applications. ITO was prepared through radio frequency (RF) magnetron sputtering using argon gas with no alteration in temperature or changes in substrate heating, followed with annealing in a tube furnace under inert conditions. An investigation of the influence of thickness on the optical, electrical, and physical properties of the films was conducted. We found that the best thickness for ITO thin films was 100 nm in terms of optical, electrical, and physical properties. To gain full comprehension of the impact on electrical properties, the different samples were characterized using a four-point probe and, interestingly, we found a high conductivity in the range of 1.8–2 × 106 S/m, good resistivity that did not exceed 1–2 × 10−6 Ωm, and a sheet resistance lower than 16 Ω sq−1. The transparency values found using a spectrophotometer reached values beyond 85%, which indicates the high purity of the thin films. Atomic force microscopy indicated a smooth morphology with low roughness values for the films, indicating an adequate transitioning of the charges on the surface. Scanning electron microscopy was used to study the actual thicknesses and the morphology, through which we found no cracks or fractures, which implied excellent deposition and annealing. The X-ray diffraction microscopy results showed a high purity of the crystals, as the peaks (222), (400), (440), and (622) of the crystallographic plane reflections were dominant, which confirmed the existence of the faced-center cubic lattice of ITO. This work allowed us to design a method for producing excellent ITO thin films for solar-cell applications.

Development of ITO Transparent and Conductive Thin Films

Thin‐Metal‐Film‐Based Transparent Conductors: Material Preparation, Optical Design, and Device Applications

Transparent electric conductive films for optoelectronic devices

Development of Novel TiO2-Based Transparent Conducting Oxide Films

Thin‐Metal‐Film‐Based Transparent Conductors: Material Preparation, Optical Design, and Device Applications (Advanced Optical Materials 3/2021)

Gas Phase Fabrication of Morphology-Controlled ITO Nanoparticles and Their Assembled Conductive Films.

Ultrathin Metal Films as the Transparent Electrode in ITO‐Free Organic Optoelectronic Devices

Large-Scale, High-Transparency, Ultra-thin ITO Membranes with Robust Conductivity and Flexibility

Development of the Organic-Inorganic Transparent and Conductive Film

Transparent electrodes for organic optoelectronic devices: a review

Research Progress of Tin Oxide-Based Thin Films and Thin-Film Transistors Prepared by Sol-Gel Method

A Novel Strategy of Fabricated Flexible ITO Electrode by Liquid Metal Ultra-Thin Oxide Film

Properties of PET/ITO Thin Films Deposited by DC Magnetron Sputtering

Monolithic Use of Inert Gas for Highly Transparent and Conductive Indium Tin Oxide Thin Films

The key of ITO films with high transparency and conductivity: Grain size and surface chemical composition

A leaf-like structured ITO conductive transparent thin film from visible to near-infrared region with enhanced stability

Development of Novel Tungsten-Doped High Mobility Transparent Conductive In2O3 Thin Films

Electronic conduction properties of indium tin oxide: single-particle and many-body transport

The Production of Ito Transparent Conductive Materials and the Development Prospect in the Field of Biological Information

Effect of film thickness on the properties of indium tin oxide thin films

Influence of film thickness on the texture, morphology and electro-optical properties of indium tin oxide films