Abstract:This work addresses the topic of extrusion-based additive manufacturing (filament-based material extrusion) of patient-specific biofunctional maxillofacial implants. The technical approach was chosen to overcome the shortcomings of medically established fabrication processes such as a limited availability of materials or long manufacturing times. The goal of the work was a successful fabrication of basic implants for defect reconstruction. The underlying vision is the implants’ clinic-internal and operation-accompanying application. Following a literature search, a material selection was conducted. Digitally prepared three-dimensional (3D) models dealing with two representative mandible bone defects were printed based on the material selection. An ex-vivo model of the implant environment evaluated dimensional and fitting traits of the implants. Glycol-modified PET (PETG) and thermoplastic polyurethane (TPU) were finally selected. These plastics had high cell acceptance, good mechanical properties, and optimal printability. The subsequent fabrication process yielded two different implant strategies: the standard implant made of PETG with a build-up rate of approximately 10 g/h, and the biofunctional performance implant with a TPU shell and a PETG core with a build-up rate of approximately 4 g/h. The standard implant is meant to be intraoperatively applied, as the print time is below three hours even for larger skull defects. Standard implants proved to be well fitting, mechanically stable and cleanly printed. In addition, the hybrid implant showed particularly cell-friendly behavior due to the chemical constitution of the TPU shell and great impact stability because of the crack-absorbing TPU/PETG combination. This biofunctional constellation could be used in specific reconstructive patient cases and is suitable for pre-operative manufacturing based on radiological image scans of the defect. In summary, filament-based material extrusion has been identified as a suitable manufacturing method for personalized implants in the maxillofacial area. A further clinical and mechanical study is recommended.

Fabrication of Medical Implant Based on RE and RP Technologies

[Application of Computer Aided Design/computer Aided Manufactured Techniques in Mandible Defect Reconstruction].

Rapid prototyping and rapid manufacturing in medicine and dentistry

Fabricating Facial Prostheses Using CAD/CAM and Rapid Prototyping Technique

THE APPLICATION OF RAPID PROTOTYPING IN THE ORTHOGNATHIC SURGERY

Study on Application of Rapid Prototyping in Precise Oral and Maxillofacial Surgery

Application of 3D Printing in Implantable Medical Devices

Basic theories of rapid prototyping technique and its application in the clinic of craniomaxillofacial surgery

Biofunctional Glycol-Modified Polyethylene Terephthalate and Thermoplastic Polyurethane Implants by Extrusion-Based Additive Manufacturing for Medical 3D Maxillofacial Defect Reconstruction

Research Situation of Rapid Prototyping Techniques Used for Tissue Engineering Scaffold

Fused Deposition Modeling PEEK Implants for Personalized Surgical Application: From Clinical Need to Biofabrication

Printing@Clinic: from Medical Models to Organ Implants

Application of Reverse Engineering and Rapid Prototyping for Reconstruction of Human Mandible

A Systematic Approach for Making 3D-Printed Patient-Specific Implants for Craniomaxillofacial Reconstruction

Biomaterial Forming Research Using RP Technology

Fabrication Technology of Tissue Engineering Scaffold Based on Rapid Prototyping

Additive fabrication technologies applied to medicine and health care: a review

3D Printing Surgical Implants at the Clinic: A Experimental Study on Anterior Cruciate Ligament Reconstruction

Use of rapid prototyping and three-dimensional reconstruction modeling in the management of complex fractures

Revolutionizing Medical Implant Fabrication: Advances in Additive Manufacturing of Biomedical Metals

Rapid Prototyping As a Tool for Manufacturing Bioartificial Livers