Abstract:Continual growing demand for metals in regular and emerging markets has led to an increasing use of chemicals and reagents in ore processing. This trend force to incur in an increasing use of commodities which inevitable leads to higher operational costs and environmental concern. The chemicals and reagents used in flotation processes especially invoke high costs of handling and disposal due to their hazardous nature, but until now, few studies have been carried out to seek possible alternatives. In order to develop a cheaper and greener processes, these hazardous materials should be replaced by more sustainable products, by-products, or wastes generated by other industries. Biosolids, cheaper and greener than chemical frothers and collectors, have been tested successfully in flotation processes. Studies of removal rates and froth flotation kinetics have been carried out independently, nevertheless a deeper understanding of the tradeoffs involved between the rates and kinetics should be obtained. This work evaluates the use of different collectors (conventional collector (CC), biosolids (and their main components), and mixtures of CC and biosolids main components) in the froth flotation of copper sulfide ores. Tests were carried out in Denver Cells, at fixed collector, frother, and pH levels, in order to estimate metallurgical and kinetic parameters. In rougher flotation tests, biosolids show to be the most efficient non-CCs, achieving Cu recoveries of 64.1%. CC achieved 76.2% Cu recoveries while none of the pure biosolids main components achieved Cu recoveries over 60%. In the kinetics studies, only the partial replacement of CC (by 50% of Humic Acids (HAs) or biosolids) allowed a similar copper recovery once compared with CC (~81% Cu to be obtained with a fast kinetic constant of ~0.88 min-1). For molybdenum, partial replacement of CC produced better recovery and kinetics constants (k of 0.83 min-1 and R∞ of 66.10% for 50% CC - 50% HAs; k of 0.90 min-1 and R∞ of 61.79% for 50% CC - 50% biosolids). Results show that different combinations of biosolids - CC or HAs - CC could achieve optimal flotation conditions. As evaluated, an optimal combinations would allow considerable reductions in energy and chemical consumption.

Research on Optimization of Flotation Column and 730 Series Frother and Tests on Copper Separation

Optimization of key link parameters and mechanism of the jet-stirring synergistic column flotation method

Study on Flotation of a Refractory Copper-zinc Polymetallic Sulfide Ore

Separation performance of mechanical flotation cell and cyclonic microbubble flotation column: in terms of the beneficiation of high-ash coal fines

Parametric Optimization in Rougher Flotation Performance of a Sulfidized Mixed Copper Ore

An experimental study of copper sulfide flotation in a packed cyclonic–static microbubble flotation column

Effect of air profiling and frother concentration on a flotation bank performance

Study of a Novel Fluidized Bed Flotation Column with Enhanced Bubble Dispersion

Study on the effect of flow field optimization on flotation efficiency

Research on Beneficiation Technique to Improve Recovery of Deep Mined Copper Ore

Cyclonic separation effect of metallic ores in cyclonic-static micro-bubble flotation column

Study on Flotation Technique of a Copper-lead-zinc Sulfide Ore in Xizang

Comparative study of conventional cell and cyclonic microbubble flotation column for upgrading a difficult-to-float Chinese coking coal using statistical evaluation

Experimental Study on Comprehensive Recovery of Valuable Minerals from Flotation Tailings in Copper-Molybdenum Mine

Research on Bulk Floatation Discarding Tailing of Copper and Zinc Polymetallic Sulfide Ores

Experiment Study on New Processing of a Mixed Flotation of Recoverying Complex Copper-Lead-Zinc Polymetallic Sulphide Ore

Enhancing flotation separation of fine copper oxide from silica by microbubble assisted hydrophobic aggregation

Iron Oxide-Copper Mineral Associations in Supergene Zones: Insights into Flotation Challenges and Optimization Using Response Surface Methodology

The effect of water quality change on copper flotation

Use of humic substances in froth flotation processes

High-turbulence fine particle flotation cell optimization and verification