Abstract:A deep understanding of the spectral gain characteristics of optical parametric oscillators (OPOs) and optical parametric amplifiers (OPAs) is important for a highly efficient optical parametric conversion. We numerically calculated the spectral gain characteristics of a quasi-phase-matching (QPM) parametric conversion process using the periodically poled 6% (mol/mol) MgO doped LiNbO3 (PPMgLN) as the nonlinear crystal. In the simulation we utilized the approach of a transformative matrix of the periodically poled nonlinear medium, which results from the small-signal approximation of three-wave mixed nonlinear equations. Numerical simulation results show that: (1) The full width at half maximum (FWHM) of the spectral gain of the parametric process becomes wider with the increase of parametric wavelength and reaches the maximum at degeneration; (2) The gain coefficient decreases gradually with the increase of parametric wavelength; (3) The spectral gain bandwidth decreases correspondingly with the increase of the nonlinear material length; (4) There exists an optimal parametric wavelength band, which is most suitable for the high gain parametric conversion when pumped by a laser source with a wide wavelength band, such as the high power fiber laser.

High-gain Degenerated Optical Parametric Chirped-Pulse Amplification in Periodically Poled LiTaO3

Experimental Realization of Broadband Parametric Generation in a Quasi-Periodically Poled LiTaO_3

Ultra-flat and Broadband Two-Pump Optical Parametric Amplifiers Using a Single-Section Highly Nonlinear Fiber

Efficiency-enhanced optical parametric down conversion for mid-infrared generation on a tandem periodically poled MgO-doped stoichiometric lithium tantalate chip.

Demonstration of Optical Parametric Gain Generation in the 1 Μm Regime Based on a Photonic Crystal Fiber Pumped by a Picosecond Mode-Locked Ytterbium-Doped Fiber Laser

Degenerated Optical Parametric Chirped-Pulse Amplification with Cesium Lithium Borate.

Amplification Assisted Optical Parametric Oscillator in the Mid-Infrared Region

Widely tunable, high-repetition-rate, dual signal-wave optical parametric oscillator by using two periodically poled crystals

Fabrication of Bulk Periodically Poled LiNbO/sub 3/ and LiTaO/sub 3/ by Applying a Pulsed- Field For

Efficient Parametric Conversion from 106 to 38 Μm by an Aperiodically Poled Cascaded Lithium Niobate

Laser Performance of Nd : Yag at 946 Nm and Frequency Doubling with Periodically Poled Litao3

Analysis on Spectral Gain Characteristics of Ppmgln Based Quasi-Phase-Matching Optical Parametric Amplification

Bandwidth and Stability Enhancement of Optical Parametric Amplification Using Chirped Ferroelectric Superlattice

High Power Efficient 3.81 $\mu{\rm M}$ Emission from a Fiber Laser Pumped Aperiodically Poled Cascaded Lithium Niobate

Nonlinear Optical Conversion of the Orbital Angular Momentum of Light in a PPLT Crystal

High-efficiency Semi-External-cavity-structured Periodically Poled MgLN-based Optical Parametric Oscillator with Output Power Exceeding 92 W at 382 Μm

Mid-Infrared Optical Parametric Oscillator Based on All-Solid-State-Pumped Periodically Poled LiNbO

Widely and Continuously Tunable Optical Parametric Generator Based on Mgo-Doped Periodically Poled Linbo3 Crystal

Subnanosecond visible two-stage optical parametric generator and amplifier based on MgO:PPLN and LBO crystals at strong pump depletion

Efficient parametric conversion from 1.06 to 3.8 μm by an aperiodically poled cascaded lithium niobate.

Generation of 840 mW of red light by frequency doubling a diode-pumped 1342 nm Nd:YVO4 laser with periodically-poled LiTaO3