Abstract:The polymeric hydrophilic/hydrophobic interactions into membrane formation were introduced. A general and straightforward strategy for preparing membranes with nanometer-scale pores was suggested by utilization of hydrophilic/hydrophobic interactions to generate phase separation and removal of polyion aggregates through water immersion. Poly(vinylidene fluoride)(PVDF) and sodium allyl sulfonate(SAS) serve as the membrane material and pore-generator, respectively, resulting in chemically stable and oxidation-resistant membranes with various potential applications. Following the same procedure invented to produce the laboratory-scale membranes, the scale-up process to manufacture large-area membranes was completed. The obtained membrane exhibited the conductivity of 3.5×10-2S·cm-1, thickness of 100 μm, bursting strength over 0.3 MPa and effective area of 800 mm×900 mm.In order to investigate whether this membrane is capable of assembling vanadium flow battery(VFB) stack, the permeation selectivity for H+/VO2+mixtures through the membranes, made from different pore-generator contents, were measured. Obviously,proton transports through membrane far faster than vanadium ion. Since the volume of H+is much smaller than that of VO2+in electrolyte, the difference in charge exclusion effect, which distinguishes from general ion exchange mechanism due to Donnan equilibrium effect, leads to the selectivity for H+/VO2+up to 306. Using this nano-porous membrane, a 15 k W VFB stack was fabricated to evaluate the membrane performance for application. Generally, the stack test indicates that the membrane provided feasible proton permeation and rejection of vanadium ion, with average columbic efficiency of 93% and energy efficiency of 72% during the period of over 700 charge/discharge cycles, which shows promising market potential for electricity energy conversion and storage processes.

Adsorption Equilibria of VO2+/H+ in Cation Exchange Membrane

Adsorption and Diffusion of VO2+and VO2+across Cation Membrane for All‐Vanadium Redox Flow Battery

Equilibrium and Dynamic Absorption of Electrolyte Species in Cation/Anion Exchange Membranes of Vanadium Redox Flow Batteries

Study on the Transport Process of Vanadium Ions Across Membrane Based on Adsorption-Diffusion Mechanism (Ⅰ)——Adsorption-Diffusion Model of Ion Exchange Membrane

Vanadium recovery by electrodialysis using polymer inclusion membranes

Influence of divalent cations adsorption on the performance of electromembrane process

Study of Chemical Modified Amphoteric Ion Exchange Membrane from Taurine

Selective adsorption in ion exchange membranes: The effect of solution ion composition on ion partitioning

Modeling Sorption of Water and Vanadium Cations by Ion-Exchange Membranes

Approach to high proton/vanadium selectivity in an ionic exchange membrane via a hyperbranching design

Extraction of vanadium (IV) ions by metal-modified resin through multiple effects: Ionic substitution and proton exchange

High ion selectivity Aquivion-based hybrid membranes for all vanadium redox flow battery

Quaternized Membranes Bearing Zwitterionic Groups for Vanadium Redox Flow Battery Through a Green Route

Cation exchange hybrid membranes based on PVA for alkali recovery through diffusion dialysis

Development of Proton Conduction Membranes in Application of Vanadium Flow Battery

The effect of counter-ion substitution on poly(phthalazinone ether ketone) amphoteric ion exchange membranes for vanadium redox flow battery

Theoretical investigation of molybdenum/tungsten-vanadium solid solution alloy membranes: Thermodynamic stability and hydrogen permeation

Swelling-Induced Quaternized Anthrone-Containing Poly(aryl ether ketone) Membranes with Low Area Resistance and High Ion Selectivity for Vanadium Flow Batteries

Influence of Membrane Diffusivity on the Performance of a Single Vanadium Flow Battery

Ion diffusion behaviors through porous proton conductive membrane

Preparation of Ion Exchange Membrane for All Vanadium Flow Redox Battery