Response Surface Methodology Optimization of Lipase-Catalyzed Transesterification Ofjatropha CurcasL. Seed Oil for Biodiesel Production
Yingxia Li,Dong Doug Yu,Yun Wang,Xiu Li Guan
DOI: https://doi.org/10.5504/bbeq.2013.0090
2013-01-01
Biotechnology & Biotechnological Equipment
Abstract:The immobilized lipase-catalyzed transesterification of Jatropha curcas L. seed oil and methanol for biodiesel production in tert-butanol was investigated The effects of different tert-butanol volume, methanol molar ratio, reaction temperature, reaction time and immobilized lipase amount on the total conversion were systematically analyzed by response surface methodology (RSM. RSM analysis showed good correspondence between experimental and predicted values. The optimal conditions for the transesterification were a reaction time of 17.355 h, a reaction temperature of 34.868 degrees C, an immobilized lipase amount of 12.435 %, a methanol molar ratio of 5.282:1, a tert-butanol volume ratio of 0.577:1. The optimal predicted yield of fatty acid methyl esters (FAME) was 88.5 % and the actual value was 88.1 %. The predicted yield of fatly acid esters and the real one was very close, indicating that the RSM based on central composite design (CCD) was adaptable for a FAME study for the present transesterification system. Moreover, the infrared spectum of biodiesel showed the characteric bands of C=O, O-C-O, C=C and (CH2)n. Furthermore, GC-linked mass spectrometry showed that biodiesel was mainly composed of the methyl esters of hexadecanoic, 9,12-octadecadienoic and 9-octadecadienoic acid