Abstract:Polyvinyl chloride (PVC) is the most widely used general flame-retardant plastic worldwide; however, the large number of plasticizers added during processing significantly reduces its flame-retardant property. To prepare a new type of PVC material with highly efficient flame retardancy and smoke suppression, antimony trioxide (Sb2O3), talc powder, hydromagnesite, and zinc borate were added in different proportions to PVC to explore the flame-retardant properties, thermal weight, smoke density (Ds), and mechanical properties of the composite materials. Results showed that the limiting oxygen index value of each group was higher than 27% after adding talc powder, magnesite, and zinc borate to replace part of the Sb2O3. This value was within the refractory-grade level and indicated a good flame retardancy performance. The replacement effect was in line with the experimental expectation. The lowest Ds peak value was 656.4 when the flame retardants were added with 10 wt% Sb2O3, 50 wt% hydromagnesite, 20 wt% talc, and 20 wt% Zn3BO6. Compared with pure Sb2O3 as a flame retardant, the Ds peak value decreased by 46.7%. The thermogravimetric decomposition temperature of the composites in each group was generally higher than that of the group with pure Sb2O3 as a flame retardant, increasing by 45.3 °C. The thermal stability of the composites was improved, and the elongation at the break and tensile strength were 234.9% and 25.8 MPa, respectively, indicating good mechanical properties. The results showed that using compound flame retardants to replace most of the Sb2O3 is an effective technique for obtaining good flame retardancy and mechanical properties of PVC. This study, not only reduced the manufacturing cost of flame-retardant PVC, but also effectively reduced its smoke density and the time to reach the highest smoke density, which provided a research reference for the application and promotion of flame-retardant PVC.

Properties of Low Density Polyethylene Flame Retardant Films

Flame Retardation and Thermal Degradation of Intumescent Flame‐retarded Polypropylene Composites Containing Spirophosphoryldicyandiamide and Ammonium Polyphosphate

Mechanical Properties and Thermal Degradation of Flame Retardant PC/HDPE Blending with Spirocyclic Hydroxybenzene Phosphate

A Novel Halogen‐free Intumescent Flame Retardant Containing Phosphorus and Nitrogen and Its Application in Polypropylene Systems

The mechanical properties and thermal performances of polypropylene with a novel intumescent flame retardant

A Novel Zinc Chelate Complex Containing Both Phosphorus and Nitrogen for Improving the Flame Retardancy of Low Density Polyethylene

Flame Retardant Properties and Mechanical Properties of Polypropylene with Halogen and Halogen-Free Flame Retardant System

Synergistic Flame Retardancy of Linear Low-Density Polyethylene with Surface Modified Intumescent Flame Retardant and Zinc Borate

Investigation of Novel Intumescent Flame Retardant Low‐density Polyethylene Based on SiO2@MAPP and Double Pentaerythritol

Synergistic effect of expandable graphite and intumescent flame retardants on the flame retardancy and thermal stability of polypropylene

Mechanical, Dielectric and Flame-Retardant Properties of GF/PP Modified with Different Flame Retardants

Preparation and Properties of Modified Ammonium Polyphosphate Synergistic with Tris(2-Hydroxyethyl) Isocynurate for Flame-Retardant LDPE

Preparation and properties of modified aluminum diethylphosphinate flame retardant for low‐density polyethylene

Synergistic Flame Retardant Effect of Organic Boron Flame Retardant and Aluminum Hydroxide on Polyethylene

A green, effective, and synergistic flame retardant for poly(ethylene-co-vinyl acetate) resin

Effect of zinc-aluminum layered double hydroxides on thermal and flame retardant properties of intumescent flame retardant polypropylene composites

The Flame Retardancy and Smoke Suppression Performance of Polyvinyl Chloride Composites with an Efficient Flame Retardant System

Preparation and Properties of Multilayer Core-Shell Structure Ammonium Polyphosphate Synergistic with THEIC for Flame Retardant LDPE

Combustion Properties and Thermal Degradation Behavior of Polylactide with an Effective Intumescent Flame Retardant

Boosting Flame Retardancy of Polypropylene/Calcium Carbonate Composites with Inorganic Flame Retardants

Study on synergistic expansion and flame retardancy of modified kaolin to low density polyethylene