Abstract:Mo/HZSM-5 and Cu–Mo/HZSM-5 catalysts for the non-oxidative aromatization of methane have been prepared by microwave heating method. The effects of Mo loading, the molar ratio of Cu/Mo and preparation method on the catalytic performance of catalysts were studied. The results were compared with those for the methane aromatization over catalysts prepared by conventional heating. Both two kinds of catalysts have the maximum methane conversion when the Mo loading is 6%. The catalysts prepared by microwave heating exhibited higher selectivity to benzene than that prepared by conventional heating. The addition of metal Cu to Mo/HZSM-5 catalyst prepared by microwave heating enhanced the lifetime of catalyst, and gave rise to a little increase in methane conversion. The molar ratio of Cu/Mo influenced the methane conversion, and the maximum value was attained when Cu/Mo=0.05, whereas no significant influence on the benzene selectivity was observed with the increase molar ratio of Cu/Mo. N2 adsorption results showed that the catalysts prepared by microwave heating have the larger surface area and the similar pore volume compared with the catalysts prepared by conventional heating. This fact revealed that the more Mo species located on the outer surface of catalysts prepared by microwave heating is the main reason why they have better catalytic performance. XRD analysis indicated that the Mo species are highly dispersed on HZSM-5 zeolite. The addition of Cu influenced the dispersion. The actual active phase Mo2C can be identified on the catalyst surface after reaction. TEM analysis revealed the carbonaceous deposition to have the form of carbon nanotube after reaction, with a uniform size range of 10–20nm. TG analysis indicated that carbonaceous deposition on the catalysts prepared by microwave heating is lower than that by conventional heating, and the metal Cu further prompts the stability of catalyst. Most of the carbonaceous deposition on catalysts prepared by microwave heating is formed at low temperature and it is easy to burn-off. Coke accumulation at high temperature is the main reason of catalyst deactivation. The carbonaceous deposition formed on the catalysts for non-oxidative aromatization of methane is different from those formed on the catalysts for partial oxidation of methane.

The effect of oxygen on the aromatization of methane over the Mo/HZSM‐5 catalyst

Study on direct aromatization reaction of methane: I. The reaction performance of supported Mo catalysts under oxygen-free conditions

Effect of Oxygen on Aromatization of Methane over Mo/HZSM-5 Zeolite

Effect of Metal on the Methanol to Aromatics Conversion over Modified ZSM-5 in the Presence of Carbon Dioxide

Methane Dehydro-aromatization over Mo/HZSM-5 in the Absence of Oxygen: A Multinuclear Solid-State NMR Study of the Interaction between Supported Mo Species and HZSM-5 Zeolite with Different Crystal Sizes

The performance of methane aromatization on Mo-Cr/HZSM-5 catalyst

The Effect of Cu Species on the Chemical State of Mo in the Mo/Cuh-Zsm-5 Catalyst for Methane Non-Oxidative Aromatization

Methane Aromatization in the Absence of Oxygen Over Mo/H[B]ZSM-5 Catalysts

Methane Aromatization Under O 2 -Free Conditions on Zinc Modified Mo/HZSM-5 Catalyst

Effect of Silanation of Hzsm-5 Zeolite on Catalytic Performance of Mo/Hzsm-5 in Methane Dehydro-Aromatization

Remarkable Improvement on the Methane Aromatization Reaction: A Highly Selective and Coking-Resistant Catalyst

Effect of Co Additive on Formation of Coke Deposits in Methane Dehydro-Aromatization over Mo/HZSM-5 Catalyst

Effect of Hzsm-5 Zeolite Properties on Dehydro-Aromatization of Methane over Mo/Hzsm-5 Catalyst

Methane Dehydroaromatization over Mo/HZSM-5 Catalysts in the Absence of Oxygen: Effects of Silanation in HZSM-5 Zeolite

Methane dehydroaromatization over Mo/HZSM-5 catalysts: The reactivity of MoCx species formed from MoOx associated and non-associated with Brönsted acid sites

Methane Dehydro-Aromatization over Mo/Hzsm-5 Catalyst Prepared by Different Methods

The Reaction Performance and Surface Character of Ni Modified Mo/Hzsm-5 Catalyst for Methane Aromatization

Effects of Support HZSM-5 with Different Crystal Size on Catalytic Performance of Mo/HZSM-5 for Methane Non-oxidative Aromatization

Enhancing Methane Aromatization Performance by Reducing the Particle Size of Molybdenum Oxide

Methane Aromatization Using Mo-based Catalysts Prepared by Microwave Heating

Non-oxidative conversion of methane to aromatics over modified Mo/HZSM5 catalysts