Abstract:A graphite anode with a slightly expanded structure achieves a well‐balance of stable lithium‐ion/metal storage in commercial carbonate electrolytes. With a controlled capacity of 558 mAh g‐1 for the anode, the full cell coupled with a high‐loading LiNi0.8Co0.1Mn0.1O2 cathode under a low N/P ratio (≈1.15) shows good cycling stability. Integrating lithium‐ion and metal storage mechanisms to improve the capacity of graphite anode holds the potential to boost the energy density of lithium‐ion batteries. However, this approach, typically plating lithium metal onto traditional graphite anodes, faces challenges of safety risks of severe lithium dendrite growth and short circuits due to restricted lithium metal accommodation space and unstable lithium plating in commercial carbonate electrolytes. Herein, a slightly expanded spherical graphite anode is developed with a precisely adjustable expanded structure to accommodate metallic lithium, achieving a well‐balanced state of high capacity and stable lithium‐ion/metal storage in commercial carbonate electrolytes. This structure also enables fast kinetics of both Li intercalation/de‐intercalation and plating/stripping. With a total anode capacity of 1.5 times higher (558 mAh g−1) than graphite, the full cell coupled with a high‐loading LiNi0.8Co0.1Mn0.1O2 cathode (13 mg cm−2) under a low N/P ratio (≈1.15) achieves long‐term cycling stability (75% of capacity after 200 cycles, in contrast to the fast battery failure after 50 cycles with spherical graphite anode). Furthermore, the capacity of the full cell also reaches a low capacity decay rate of 0.05% per cycle at 0.2 C under the low temperature of −20 °C.

Modified Spherically Natural Graphite Anode Material of Lithium-Ion Batteries

Cabon Coated Natural Graphite As Anode Materials For Lithium-Ion Batteries

Modified Natural Flake Graphite with High Cycle Performance As Anode Material in Lithium Ion Batteries

Mo-Doped SnO2 Nanoparticles Embedded in Ultrathin Graphite Nanosheets as a High-Reversible-Capacity, Superior-Rate, and Long-Cycle-Life Anode Material for Lithium-Ion Batteries

Investigations on the modified natural graphite as anode materials in lithium ion battery

Improvement of Natural Graphite As a Lithium-Ion Battery Anode Material, from Raw Flake to Carbon-Coated Sphereelectronic Supplementary Information (ESI) Available: Colour Versions of Figs. 6, 8 and 9. See Http://Www.rsc.org/suppdata/jm/b3/b316702j/

Artificially regulated interphase on natural graphite realizes rapid charge and durable high-temperature cycling of Li-ion batteries

Modified Graphite As Anode for Lithium Ion Battery

Spherical nano-graphite anode derived from electrochemical stripping for high performance Li-ion capacitors

Effects of Graphite on Zn-Sb Alloys As Anode Materials for Lithium-Ion Batteries

Efficient performance optimization of natural graphite enabled by hydrothermal modification with Mg(NO3)2

Revisiting the Roles of Natural Graphite in Ongoing Lithium‐Ion Batteries

Purification and Carbon-Film-Coating of Natural Graphite As Anode Materials for Li-Ion Batteries

Pyrolytic Carbon Coated Graphite Anode for Lithium Ion Battery

Homogeneous Distributed Natural Pyrite-Derived Composite Induced by Modi-Fied Graphite As High-Performance Lithium-Ion Batteries Anode

A Slightly Expanded Graphite Anode with High Capacity Enabled By Stable Lithium‐Ion/Metal Hybrid Storage

Pyrolytic Polyurea Encapsulated Natural Graphite As Anode Material for Lithium Ion Batteries

Incorporating Α-Al2o3 Nanodots into Expanded Graphite Anodes Toward Stable Fast Charging for Lithium-Ion Batteries

The shape modification of nature graphite powder used in lithium ion batteries

Fabrication and Performance of High Energy Li-Ion Battery Based on the Spherical Li[Li0.2Ni0.16Co0.1Mn0.54]O2 Cathode and Si Anode

Improving Natural Microcrystalline Graphite Performances by a Dual Modification Strategy toward Practical Application of Lithium Ion Batteries