Abstract:Ordered mesoporous Santa Barbara amorphous (SBA-15) materials have high surface areas and are widely used in adsorption, separation, filtration, and heterogeneous catalytic processes. However, SBA-15 surfaces contain hydroxyl groups that are unsuited to the adsorption of organic pollutants; thus, SBA-15 must be chemically modified to promote its adsorption activity. In this study, amino-functionalized nanoporous SBA-15 was fabricated by employing sodium silicate as a precursor. The structural characteristics of the prepared composites were examined using thermogravimetric analysis, X-ray diffraction, Fourier transform infrared spectrometry, field-emission scanning electron microscopy, transmission electron microscopy, and surface area analysis. The prepared SBA-15 had a large pore size (6.46–7.60 nm), large pore volume (1.037–1.105 cm3/g), and high surface area (546–766 m2/g). Functionalization caused a reduction in the SBA-15 pore volume and surface area, whereas amino groups that promoted an interaction between adsorbates and solids facilitated solute adsorption. The adsorption of tannic acid (TA) onto amino-modified silica composites (SBA-15 and 3-aminopropyltriethoxysilane (SBA-15/APTES) and SBA-15 and pentaethylenehexamine (SBA-15/PEHA)) was studied. Their adsorption capacities were affected by solution temperature, solution pH, agitation speed, adsorbent dosage, and initial TA concentration. The maximum adsorption capacities for SBA-15/APTES and SBA-15/PEHA were 485.18 and 413.33 mg/g, respectively, with SBA-15/APTES exhibiting ultrafast removal of TA (98.61% removal rate at 15 min). In addition, this study explored the thermodynamics, adsorption isotherms, and kinetics. A comparison of two types of amino-functionalized SBA-15 was used for the first time to adsorb TA, which providing valuable information on TA adsorption on high adsorption capacity materials in water media.

New Efficient Al-Containing Sba-15 Materials for Removing Nitrosamines in Mild Conditions

Creating the Adsorptive Sites with High Performance Toward Nitrosamines in Mesoporous Silica MCM-41 by Alumina Modifier

Modifying MCM-41 As an Efficient Nitrosamine Trap in Aqueous Solution

Tailoring the nano-channel of ZrO 2/SBA-15 mesoporous materials for efficiently trapping and degradation volatile nitrosamines

Optimization of mesoporous silica through nano-casting to capture nitrosamines in environment

Creation Of Acid Sites On Sba-15 Mesoporous Silica By Alumination

Removal of Volatile Nitrosamines with Copper Modified Zeolitespreliminary Communication: See Ref. 42.

Novel Mesoporous Composite with Zeolite-Like Selectivity to Capture Tobacco Specific Nitrosamine NNK

3D net-linked mesoporous silica monolith: New environmental adsorbent and catalyst

The Synthesis of Novel Porous Functional Materials for Use As Nitrosamine Traps

Functional Mesoporous Material Derived from 3D Net-Linked SBA-15.

Ordered Mesoporous Materials. Novel Catalyst for Degradation of N '-Nitrosonornicotine

Studies on removal of n-nitrosamines in cigarette smoke by zeolites and molecular sieves

SBA-15 with short-sized channels modified with Fe2O3 nanoparticles. A novel approximation of an efficient adsorbent for As removal in contaminated water

Modification of Structure of Pore Wall of Mesoporous Aluminosilicate to Increase Its Adsorptive Capability for Nitrosamine

Adsorption and Catalytic Degradation of Nitrosamines by Zeolites and Molecular Sieves

Solvent-free Surface Functionalized SBA-15 As a Versatile Trap of Nitrosamines

New Development in Nanoporous Composites: Novel Functional Materials for Capturing Nitrosamines in Airstreams

Preparation of Amino-Functionalized Mesoporous SBA-15 Nanoparticles and the Improved Adsorption of Tannic Acid in Wastewater

Surface functionalization of SBA-15 by the solvent-free method

In Situ Ftir Investigation on the Adsorption of Nitrosamines in Zeolites