Abstract:The deformation coordination of grain boundaries determines the nucleation and evolution of microvoids and affects the damage and fracture behavior of materials. However, grain boundary deformation is extremely complex and difficult to predict owing to the difference in intergranular orientation and grain stress state. Among them, two important ways of coordinating deformations are the accumulation of dislocations at grain boundaries and intergranular transfer. The geometric relationship of the activated intergranular slip systems determines the difficulty of slip transfer and the uniformity of deformation at grain boundaries. Moreover, owing to the complex grain boundary conditions of polycrystalline materials, it is difficult to accurately measure the actual stress state and deformation of grain boundaries, so there is a substantial discreteness between the experimentally observed slip transfer behavior and theoretical prediction results. Herein, based on the advantages of the crystal plasticity finite element method (CPFEM) in polycrystalline model construction, grain orientation, and mechanical boundary condition setting, the ferrite-ferrite symmetrical tilt and twist bicrystal models under different stress states was used to analyze the impact of stress state and relative grain orientation on grain boundary strain coordination and hardening behavior. The results show that the intergranular slip transfer factor and the resolve shear stress factor determine the strain uniformity at the grain boundary. The deformation uniformity at the grain boundary is positively correlated with the slip transfer factor, which mainly controls the intergranular deformation coordination behavior. However, the deformation at the grain boundaries of soft-oriented grains (determined by stress state and orientation) is uniform, and the slip transfer factor has little effect on strain coordination. When the slip transfer factor and the resolve shear stress factor are very small, strain concentration at the grain boundary easily occurs, making intergranular deformation coordination difficult. Therefore, the prediction results of intergranular deformation coordination combined with the slip transfer factor and resolving the shear stress factor are reasonable. In addition, the flow stress of the bicrystal model is negatively correlated with the slip shear stress factor, and the uneven deformation at the grain boundary easily causes geometrically necessary dislocations to proliferate and promote grain boundary hardening.

Computer-Simulation Of The Effect Of Grain-Size On The Properties Of Polycrystalline Specimens By Finite-Element Method

Effects Of Grain-Boundary On Elastic Modulus Of Nanocrystalline Materials

Grain-Size Dependent Thermal, Electrical And Mechanical Properties Of Bulk Nanocrystalline Materials

Grain boundary effects on the inelastic deformation behavior of bicrystals

Effects of Subgrain Size and Static Recrystallization on the Mechanical Performance of Polycrystalline Material: A Microstructure-Based Crystal Plasticity Finite Element Analysis

Phase Field Crystal Simulation of Microscopic Deformation Mechanism of Reverse Hall-Petch Effect in Nanocrystalline Materials

Crystal Plasticity Framework Related to Size Effect: from Single Crystal Parameters to Polycrystalline Mechanical Properties

Investigation of Grain Boundary and Orientation Effects in Polycrystalline Metals by a Dislocation-Based Crystal Plasticity Model

The study of grain boundary density effect on multi-grain thin film under tension

The Lattice Strain Ratio in Characterizing the Grain-to-grain Interaction Effect and Its Specific Insight on the Plastic Deformation of Polycrystalline Materials

Grain Size Effects on Plastic Strain and Dislocation Density Tensor Fields in Metal Polycrystals

Simulation of Deformation Coordination and Hardening Behavior in Ferrite-Ferrite Grain Boundary

A Study of Microstructural Length Scale Effects on the Behaviour of FCC Polycrystals Using Strain Gradient Concepts

Size-dependent yield stress in ultrafine-grained polycrystals: A multiscale discrete dislocation dynamics study

Effect of Relative Grain Size on the Flow Stress of Polycrystalline FCC Sheets in Simple Tension Test

Influence of Crystal Structure on Size Dependent Deformation Behavior and Strain Heterogeneity in Micro-Scale Deformation

Size Effect Mechanism on Foil Rolling Analyzed by Crystal Plasticity Finite Element Method

Grain boundary strengthening of FCC polycrystals

Influence of grain boundary activites on elastic and plastic deformation of nanocrystalline Cu as studied by phase filed and atomistic simulaiton

Finite Element Calculation of Polycrystalline Shear-Compression Specimens with Static Loading

Influence of Grain Orientation and Grain Boundary Features on Local Stress State of Cu-8Al-11Mn Alloy Investigated Using Crystal Plasticity Finite Element Method