Abstract:Aiming at the wedge friction damper for freight train bogie, considering Dankowicz dynamic friction, the mechanical model of a three-degree-of-freedom inclined impact vibration system with gap and dynamic friction, is simplified. The mechanical model of the system is established, the motion equation of the system is obtained, and the motion state and conditions of the system are analyzed. The Poincare map is constructed by selecting a fixed collision section, and the response of the system is solved by the fourth-order Runge-Kutta numerical method with variable step size. The transition process of the system motion and the phenomenon of sticking and chatter are analyzed by numerical simulation when the external excitation frequency changes. The results show that: 1) Under certain parameters, with the change of excitation frequency, the system undergoes periodic doubling bifurcation, inverse periodic doubling bifurcation, Grazing bifurcation and Hopf bifurcation, and there is a "periodic bubble" phenomenon in the system motion. When the system excitation frequency is between 3.35–3.55, 4.425–6.12, and 7.34–7.758, the system motion has chatter and sticking phenomena; when the system excitation frequency is between 1.75–3.24 and 3.92–4.425, the sticking phenomenon disappears, and only the chatter phenomenon exists. 2) When other parameters remain unchanged, and the mass ratio decreases from 1.15 to 0.85, nonlinear dynamic phenomena such as the transition between periodic bubbles and chaotic bubbles will be found. In this paper, the bifurcation and chaos characteristics of the impact vibration system of the wedge friction damper are studied, and the rich friction-induced vibration forms such as chatter and sticking are revealed, which provides a reference for improving the stability of vehicle operation and the selection of parameters in vehicle vibration reduction design in engineering practice.

RESEARCH ON THE INFLUENCE OF DAMPING AND CUBIC NON-LINEAR FACTOR ON DRY FRICTION ISOLATION SYSTEM WITH TUNED MASS DAMPER

Force and displacement transmissibility of a quasi-zero stiffness vibration isolator with geometric nonlinear damping

Experimental Investigations on the Nonlinear Dynamics of Magnetorheological Dampers

Research on Improved Magnetorheological Damper for Wide-Band Vibration Control

Research On Dynamic Characteristics Of A Magnetorheological Damper With Decoupling Mechanism

Finite Element Modeling of Nonlinear Active and Passive Dampers Applied to Vibration Controls

Oblique impact dynamic analysis of wedge friction damper with Dankowicz dynamic friction

Study of the effects of cubic nonlinear damping on vibration isolations using Harmonic Balance Method

Analysis and Design of the Force and Displacement Transmissibility of Nonlinear Viscous Damper Based Vibration Isolation Systems

3D FSI FEA SIMULATION AND ANALYSES OF THE DYNAMIC CHARACTERISTICS OF A DISPLACEMENT-SENSITIVE LIQUID DAMPER

RESEARCH ON CONTINUOUS DAMPING CONTROL IMPROVING FORCE ISOLATION OF A SDOF MOUNTING SYSTEM

Research on Vibration Suppression of Nonlinear Tuned Mass Damper System Based on Complex Variable Average Method

Experimental analysis on friction materials for supplemental damping devices

Theoretical study of the effects of nonlinear viscous damping on vibration isolation of sdof systems

Study on the hydraulic leveraged dynamic anti-resonance vibration isolator with nonlinear damping characteristics

Experimental study on vibration control performance of TMD-STF damper

Research on the Influence of Mechanical Characteristics of a Ferrofluid Inertial Damper on the Vibration-Damping Performance

Effect of Viscous Heating in Fluid Damper on the Vibration Isolation Performance

Studies of the performance of particle dampers attached to a two-degrees-of-freedom system under random excitation

Research Development of MR Dampers Used on Semi-active Suspension

On the decoupling of vibration damping and vibration absorption with friction dampers