Abstract:Deployable mesh antennas have been of increasing interest to the aerospace industry in recent decades [1] because of their high packaging efficiency and low areal densities [2]. In structure, an antenna, for example Astromesh shown in Fig. 1, mainly contains a network of cables and a metallic mesh to reflect electromagnetic signals, and a foldable structure that enables unfolding of the antenna from the stowed state for launch to the deployed state in orbit. If the deployable structure fails to unfold the antenna, it will immediately result in a fatal failure of the satellite. Therefore, understanding the deployment dynamics of mesh antenna is of great concern for designing purpose. Taking the Astromesh as an example, its ring truss is composed of periodic parallelogram bays whose diagonal distances are adjustable, so that the truss can be deployed by reeling in a driving cable, which runs over pulleys and along the diagonals and is powered by two motors. As shown in Fig. 1, each synchronous connection contains a pair of interlocking gears to force its two connecting longerons to rotate in unison. Thus, if all the truss members are stiff enough to be theoretically considered as rigid bodies [3], the whole truss has only one degree of freedom (DOF). As a result, all the bays deploy with the same speed in a synchronous manner [3]. However, the flexibility of the members is becoming increasingly vital with the increasing size of the antenna, ranging from 6 to 25 m currently [4]. With flexible deformation, the truss is no longer a single-DOF system. Moreover, friction between the driving cable and the pulleys causes the cable tension to decrease exponentially with the number of the pulleys passed over. As a result, the bays practically unfold with different speeds (i.e., those near the motors unfold faster than those far from the motors) in an asynchronous way. In this case, both longerons and battens suffer from notable bending moments, especially around the synchronous connections, because the interlocking gears force the adjacent bays to deploy synchronously. Therefore, it is necessary to understand that how the flexibility and the friction affect the dynamics of the deployment, the bending moments of truss members, and the motor driving forces, which are of great concern in the design.

Modeling and Simulation of Projecting Deployment Dynamics of Space Webs

Design Conception and Deployment Simulation for a Highly Synchronized Extendable/Retractable Space Mast

Research and Analysis on Dynamic Properties of Spatial Rod-cable Deployable Structure

Dynamic Modelling and Analysis of Space Webs

Study on Analysis Model of Deployable Space Membrane Structure

Kinematic Analysis of the Deployable Truss Structures for Space Applications

Static and dynamic analysis of space webs

Deployment Simulation of Inflatable Structures Based on Improved Spring-mass System

Deployment Dynamic Analysis of Circular Truss Deployable Antenna with Friction

Deployment analysis of deployable space panel and shell structure

Development of a highly synchronized deployment space mast

A Spring-Mass System Based Approach for Deployment Analysis of Inflatable Membrane Structures

Kinematic analysis of deployable toroidal spatial truss structures for large mesh antenna

Design and analysis for a deployable /retractable mast

Dynamic Analysis of Take-Up Process for Space Tethered-Net

Dynamic Modeling and Vibration Analysis of Large Deployable Mesh Reflectors

Dynamic Simulation of Space Debris Cloud Capture Using the Tethered Net

Nonlinear dynamic modeling of a tether-net system for space debris capture

Unified multi-domain modelling and simulation of space robot for capturing a moving target

Deployment Dynamics of Mesh Antennas with a Modeling Method of Tackling the Inherent Multiscale Problem

Design, analysis, and ground deployment test of space deployable mast based on double-layer deployable unit