Granulation of Fe–Al–Ce hydroxide nano-adsorbent by immobilization in porous polyvinyl alcohol for fluoride removal in drinking water

Hai-Xia Wu,Ting-Jie Wang,Lin Chen,Yong Jin,Yu Zhang,Xiao-Min Dou
DOI: https://doi.org/10.1016/j.powtec.2011.02.013
IF: 5.64
2011-01-01
Powder Technology
Abstract:Nano-adsorbents of Fe–Al–Ce trimetal hydroxide (FAC) were immobilized in porous polyvinyl alcohol (PVA) via cross-linking with boric acid. Spherical composite granules of 3–5mm in size that would not cause a large pressure drop in a packed bed were obtained. SEM images showed that the FAC particles were embedded in holes of about 10μm in the PVA granules, while the surface pores of the granules were only nano-scale in size. Thermal analysis showed that the FAC and PVA in the granules combined tightly by forming a chemical bond. The mechanical stability of the granules decreased with increased FAC concentration, and increased with increased PVA concentration. The fluoride adsorption capacity of the granules increased with FAC concentration and decreased with PVA concentration. For acceptable mechanical stability and adsorption capacity, a FAC concentration of 12% and PVA concentration of 7.5% were suggested. The adsorption capacity of the granules prepared under suggested concentrations was 4.46mg/g at an initial fluoride concentration of 19mg/L and pH 6.5. Immobilization of the nano-adsorbent in porous polyvinyl alcohol granules is a promising granulation method for water treatment in packed beds.
What problem does this paper attempt to address?