Fluoroethylene Carbonate Containing Electrolytes: Origin of Poor Shelf Life and Its Mitigation
Guiomar Hernández,Chao Xu,Sabina Abbrent,Libor Kobera,Rafal Konefal,Jiří Brus,Kristina Edström,Jonas Mindemark,Daniel Brandell
DOI: https://doi.org/10.1149/ma2019-03/2/208
2019-01-01
Abstract:The performance of lithium-ion batteries have been substantially improved in almost all aspects since the initial commercialization.[1] However, cycling stability and safety is still one of the main concerns. In this regard, electrolytes play an important role. Although carbonate electrolytes are reduced at the anode electrode, they are able to form a stable passivating layer called solid electrolyte interphase (SEI). This layer is able to suppress continuous electrolyte degradation improving the cyclability of the batteries. SEI-forming additives such as fluoroethylene carbonate (FEC) and vinylene carbonate (VC) are found to be particularly effective to stabilise this SEI layer.[2,3] However, K. Kim et al. have recently reported the thermal instability of FEC in LiPF6-based electrolyte for Li-ion batteries.[4] They show that FEC can be defluorinated by Lewis acids such as PF5, generating HF and other acids that are detrimental to the battery. Herein, we have studied the effect of FEC in LiNi1/3Mn1/3Co1/3O2 (NMC)/Li cells at room- and elevated-temperatures. In addition, we have investigated the possible mechanism of such fast degradation of LiPF6- and FEC-based electrolytes and approaches to inhibit it. At room temperature, NMC/Li cells containing FEC additive in the electrolyte presented longer cycle life than the FEC-free electrolytes. However, both electrolytes showed poor electrochemical performance when cycled at 55°C (Fig. 1a). Interestingly, we observed that the LiPF6-based electrolytes which also contains FEC undergo color change when stored at 55°C precipitating a brown solid (Fig. 1b). Shelf life of LiPF6 in FEC solution was investigated by nuclear magnetic resonance (NMR) confirming the hydrolysis of LiPF6 to phosphoric acid. Furthermore, the obtained solid was identified as a fluorine-based crosslinked polymer derived from FEC. Incorporation of a moisture scavenger compound, such as lithium 2-trifluoromethyl-4,5-dicyanoimidazole (LiTDI), in the electrolyte formulation can slow down the degradation process (Fig. 1b) and improve the battery performance at 55°C (Fig. 1c). [1] J. Electrochem. Soc. 2017, 164, A5019-A5025. [2] ACS Energy Lett. 2017, 2, 1337−1345. [3] J. Power Sources, 2018, 400, 147–156. [4] Electrochim. Acta, 2017, 225, 358–368. Figure 1