Dyestuff Wastewater Treatment by Combined SDS-CuO/TiO2 Photocatalysis and Sequencing Batch Reactor

Xuan Xu,Fang-ying Ji,Zi-hong Fan,Li He,Xue-bin Hu,Kun Zhang
DOI: https://doi.org/10.1007/s11771-012-1194-z
2012-01-01
Journal of Central South University
Abstract:Combined technology of SDS-CuO/TiO2 photocatalysis and sequencing batch reactor (SBR) were applied to treating dyestuff wastewater. Photocatalysis was carried out in a spiral up-flow type reactor as pre-treatment. SDS-CuO/TiO2 photocatalyst was prepared by modification of nano-TiO2 using CuO and sodium dodecyl sulfate (SDS). Results show that the SDS-CuO/TiO2 photocatalyst contains two kinds of crystals, including TiO2 and CuO. The band gap of this photocatalyst is 1.56 eV, indicating that it can be excited by visible light (λ<794.87 nm). And characterization also shows that there are alkyl groups on its surface. It takes 40 min to improve the biodegradability of dyestuff wastewater. Five-day biochemical oxygen demand (BOD5) and dehydrogenase activity (DHA) of wastewater reach the maximum value when dissolved oxygen is higher than 2.97 mg/L. SBR reactor was used to treat this biodegradability improved wastewater. Chemical oxygen demand (COD) and colority decline to 72 mg/L and 20 times, respectively, when the sludge loading is 0.179 kg(COD)/[kg(MLSS)·d], dissolved oxygen is 4.09 mg/L and aeration time is 10 h.
What problem does this paper attempt to address?