Abstract:With technological advances and industrial upgrading, electro-mechanical actuators (EMAs) have gradually replaced traditional hydraulic actuation systems. During operation, force servo systems inevitably suffer from external force or position disturbances, thus affecting the output performance of the system. Therefore, it is of significant engineering application value to develop EMA anti-disturbance control strategies that exhibit strong robustness and are more easily applicable to engineering practice. In this study, an open-loop transfer function of the system with command signals and disturbance signals as inputs was established based on the nonlinear mathematical models built for the core components of EMAs. To overcome the impact of external position disturbances on the motion performance of the force servo system, a proportional integral derivative (PID) controller was introduced and a high-order transfer function associated with various parameters such as speed and acceleration was derived and obtained as feedforward compensation based on the mathematical model. By incorporating a three-loop PID controller, the impact of external disturbance forces on the motion performance of the position servo system was overcome and the tracking accuracy of the system was also improved. Finally, simulation models were built using AMESim software (AMESim 2020, LMS Imagine.Lab, Roanne, France) and a dual-channel EMA performance testing system was developed. Simulation and test results indicated that both anti-disturbance control methods exhibited strong robustness and excellent anti-disturbance performance, with the control accuracy and dynamic performance almost unaffected by disturbances. This verified the correctness of the single-channel EMA anti-disturbance control strategy and the usability of the simulation model.

The EMC Design of Direct Drive Volume Control Type of Electro-Hydraulic Servo System

Design and analysis on voice coil motors drive system

METHOD OF SERIAL CONTROL TO IMPROVE DYNAMIC RESPONSE OF THE ELECTRO-HYDRAULIC POSITION SERVO SYSTEM

The Development of the Static and Dynamic Performance Integrated Test System for Electro-hydraulic Servo Valve

Design and test analysis of rotary electro-hydraulic control system for a segment assembly test bed

Pressure and speed control of electro-hydraulic drive for shield tunneling machine

Paralleling Hydraulic Control of Variable Frequency Motor and Valve for the Swing Mechanism of Segment Erector

Hardware Design of Electro-Mechanical Actuator System

Design and research of low-voltage DC Servo with EPA

A MC56F8357 Based Permanent Magnet Synchronous Motor (PMSM) Servo System

Modeling and Suppression of Electromagnetic Interference Noise on Motor Resolver of Electric Vehicle

Research on Feedback-Linearized Sliding Mode Control of Direct-Drive Volume Control Electro-Hydraulic Servo System

A Study on the Electro-Hydraulic Coupling Characteristics of an Electro-Hydraulic Servo Pump Control System

Study and Experimental Verification on Anti-Disturbance Control Strategy for Electro-Mechanical Servo Systems

Research on Energy Transmission Mechanism of the Electro-Hydraulic Servo Pump Control System

Design and Simulation of the Direct Drive Servo System

Control Design of a Hydraulic Cooling Fan Drive for Off-Road Vehicle Diesel Engine with a Power Split Hydraulic Transmission

STUDY ON THE HIGH PERFORMANCE LINEAR SERVO SYSTEM FOR MIDDLE-CONVEX AND VARYING ELLIPSE PISTON MACHINING

Robust controller design of the integrated direct drive volume control architecture for steering systems

Design of High Reliable Electromechanical Actuator Controller Based on Integrated Drive Module

Quantitative feedback controller design and test for an electro-hydraulic position control system in a large-scale reflecting telescope