Abstract:Using single metal salts of zirconium, lanthanum, and iron as raw materials and sodium alginate as a cross-linking agent, a new composite adsorbent was prepared via the co-precipitation method and embedding immobilization technology, and its phosphorus adsorption performance in wastewater was evaluated. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) were used for characterization, and a 0.5 mol·L−1 sodium hydroxide solution was used to regenerate the adsorbent. The experimental results demonstrated that the adsorption rate reached 99.88% when the wastewater volume was 50 mL, the initial concentration of phosphorus-containing wastewater was 5 mg·L−1, the pH was 5, the dosage of composite adsorbent was 0.2 g, and the adsorption time was 200 min. The prepared adsorbent could reduce the initial phosphorus concentration of 5 mg·L−1 to 0.006 mg·L−1 in simulated wastewater, and from 4.17 mg·L−1 in urban sewage to undetected (<0.01 mg·L−1), thus meeting the discharge requirements of the grade A standard of the Urban Sewage Treatment Plant Pollutant Discharge Standard (GB18918-2002). The adsorption process conformed to the Freundlich adsorption isothermal equation and quasi-second-order kinetic equation, and the adsorption reaction was exothermic and spontaneous. More importantly, after three lye regeneration tests, the removal rate of phosphorus in water remained above 68%, that is, the composite adsorbent could be reproducibly fabricated and recycled. The characterization results showed that the surface of the composite adsorbent was rough, with a complex pore structure. After phosphorus removal, the surface morphology of the composite adsorbent showed a similar honeycomb structure, with a P-H, P-O stretching vibration peak and a characteristic P2p peak. At the same time, the proportion of hydroxyl groups (M-OH) on the metal surface decreased after adsorption. Our findings thus demonstrate that the mechanism of phosphorus removal is mainly based on the coordination exchange reaction between phosphate and metal active sites and surface hydroxyl groups, resulting in the formation of granular phosphate deposits.

Zeolite (na) Modified by Nano-Fe Particles Adsorbing Phosphate in Rainwater Runoff

Enhancement of Phosphate Adsorption on Zirconium, Hydroxide by Ammonium Modification

Zeolite-based absorbent: Polyacrylic acid loading for enhanced ferric(III) removal from aqueous solution

Enhanced phosphate remediation of contaminated natural water by magnetic zeolitic imidazolate framework-8@engineering nanomaterials (ZIF8@ENMs)

Cation Exchange Resin Supported Nanoscale Zero-Valent Iron for Removal of Phosphorus in Rainwater Runoff

Enhanced Phosphate Removal by Zeolite Loaded with Mg–Al–La Ternary (hydr)oxides from Aqueous Solutions: Performance and Mechanism

Phosphate adsorption from natural waters and evaluation of sediment capping using modified clays

Preparation and Phosphorus Removal Performance of Zr–La–Fe Ternary Composite Adsorbent Embedded with Sodium Alginate

High-efficiency adsorption of phosphate by Fe-Zr-La tri-metal oxide composite from aqueous media: Performance and mechanism

Novel Three-Dimensional Ti3C2-MXene Embedded Zirconium Alginate Aerogel Adsorbent for Efficient Phosphate Removal in Water.

Designing ZIF-8/hydroxylated MWCNT nanocomposites for phosphate adsorption from water: Capability and mechanism

Hexagon flower-shaped architectures constructed of Fe-composited lanthanum hydroxide nanosheets for superior phosphate removal: Synthesis and mechanism study

Removal of Phosphate by Fe-coordinated Amino-Functionalized 3D Mesoporous Silicates Hybrid Materials

Phosphorus removal and mechanisms by Zn-layered double hydroxide (Zn-LDHs)-modified zeolite substrates in a constructed rapid infiltration system

ZrO2 Nanoparticles Confined in Metal Organic Frameworks for Highly Effective Adsorption of Phosphate

ZrO2-functionalized magnetic mesoporous SiO2 as effective phosphate adsorbent.

Green Synthesis of a Novel Hybrid Sorbent of Zeolite/lanthanum Hydroxide and Its Application in the Removal and Recovery of Phosphate from Water

Adsorption of Phosphate from Water by Easily Separable Fe3O4@SiO2 Core/shell Magnetic Nanoparticles Functionalized with Hydrous Lanthanum Oxide.

Improved Utilization of Active Sites for Phosphorus Adsorption in FeOOH/anion Exchanger Nanocomposites Via a Glycol-Solvothermal Synthesis Strategy

Nutrient sequestration from wastewater by using zeolite Na-P1 synthesized from coal fly ash

Adsorptive removal of phosphate by a nanostructured Fe-Al-Mn trimetal oxide adsorbent