Abstract:The results of studies on thermodynamics of martensitic transformation in Fe-C and Fe-X-C alloys lead the Ms temperature in structural steels to be predicted. Establishing thermodynamics of martensitic transformation in Cu- and Fe-Mn-Si based alloys built the basis of composition and processing design for Cu- and Fe- based shape memory alloys. The thermodynamic approach for calculation of Ms in ZrO2 containing ceramics and corrected formula expressing the effect of parent grain size on Ms were suggested. The revised kinetics equation of a thermal martensitic transformation shows that alloying element varying the diffusion coefficient of carbon in low-carbon steels would affect the amount of the retained austenite and it will be beneficial for the exploitation of steels with microstructure of lath martensite. Research on the isothermal kinetics of the retained austenite→martensite in GCrl5 ball bearing (AISI 52 100) steel indicates that the dimensional stability (as comparison to specimen treated by traditioinal quenching and tempering) increases 34％ in specimen treated by an isothermal holding in order to form a few percent of isothermal martensite from the retained austenite after quenching and followed by normal tempering and the contact fatigue life is not reduced. Studies of characteristics of martensitic transformations and their reverse transformations in Ni-Ti, Cu-Zn-Al, Fe-Mn-Si based alloys and ZrO2 containing ceramics reveal the factors affecting the shape memory effect (SME) and indicate the way to improve the SME as well as the exploitation of these materials. Thermodynamics study of bainitic transformation, observation of the growth ledge, studies on the effect of parent strengthening on transformations and the results of internal friction measurements all display that the bainite formation is controlled by diffusion. Addition of alloying elements hindering the diffusion of Zn and Al in Cu-Zn-Al may improve the SME and its service life. There exists the hainitic transformatioin in CeO2-ZrO2 and it relates to the appearance of brittleness in ZrO2 containing ceramics. Research on the ordering of β phase in Cu-Zn is significant for the application of alloy with ordered phase. The presentation of the criterion of spinodal decomposition in ternary alloys may be valuable for the development of alloys exhibiting high damping capacity or high strength by means of spinodal decomposition. Group theory is successfully utilized in crystallography of phase transformation. The required condition for the appearance of crystallography reversibility derived from group theory is the formation of single variant martensite. It seems effective that the soliton is introduced in the nucleation and growth model in phase transformation.

Significance of Phase Transformation Studies——taking Spinodal Decomposition As an Example

Phase-field Modelling of Spinodal Decomposition with G-phase Precipitation During Ageing

Effects of Grain Boundaries and Temperature on Spinodal Decomposition in a Binary Fe-Cr Alloy: A Phase-Field Simulation

Spinodal Decompositions in Cu-15Ni-8Sn Alloys Prepared by Mechanical Alloying and Casting

Spinodal Decomposition in Fe – 25 Cr – 12 Co – 1 Si Alloy under a 100 Koe Magnetic Field

Phase Field Study on the Spinodal Decomposition of β Phase in Zr–Nb-Ti Alloys

Formation of Nanometer Coherent Structures During Spinodal Decomposition and Ordering Coexistence Phase Transformation in Fe-24Al Alloys

Multi-component Phase-Field Simulation of Microstructural Evolution and Elemental Distribution in Fe–Cu–Mn–Ni–Al Alloy

Phase Decomposition and Morphology Characteristic in Thermal Aging Fe–Cr Alloys under Applied Strain: A Phase-Field Simulation

Mössbauer Spectrometry Study of Spinodal Decomposition in Fe-25Cr-12Co-1Si Alloy During Step Ageing

Microstructural Evolution of the Coexistence for Spinodal Decomposition and Ordering in Fe-23Al Alloy During Aging

Unravel the Spinodal Decomposition Kinetics in (FeCoCrNi)85(AlCu)15 Alloy through Small-Angle Neutron Scattering

Studies on Phase Transformations and Their Applications in Materials Engineering

Morphological instability of the G-phase induced a different contribution to hardening of ferrite phase in a duplex stainless steel

The significance of deformation mechanisms on the fracture behavior of phase reversion-induced nanostructured austenitic stainless steel

A Phase-Field Study of Spinodal Decomposition Impeded by Irradiation in U-Mo and U-Mo-Zr Alloys

Investigation of Spinodal Decomposition in Isothermally Heat Treated LDX 2101 type Duplex Stainless Steel at 475 °C

Mo¨ssbauer study of the composition fluctuation during spinodal decomposition in a 3.5 GPa Fe-10%Ni-14%Mo-19%Co (wt.%) maraging steel

The effect of interdendritic spinodal decomposition on the corrosion resistance of CoCrFeNiAl 0.5 high entropy alloy in supercritical CO 2 environment

Effect of Aging Temperature on Phase Decomposition and Mechanical Properties in Cast Duplex Stainless Steels

Transient Spinodal Decomposition During Annealing of Rapidly Solidified Al-10Sr Alloy