Abstract:2,5-Furandicarboxylic acid (FDCA) derived from biomass is a versatile platform chemical for producing various degradable polymers, especially polyethylene 2,5-furandicarbox-ylate (PEF). To reduce the high cost of feedstock, fructose instead of expensive 5-hydroxymethylfurfural (HMF) was used as the feedstock for producing FDCA in the acetic acid (HOAc) solvent by a one-pot, two-step method. Fructose was first catalytically converted into HMF and 5-acetoxymethylfurfural (AMF) in HOAc over the Amberlyst-15 catalyst. After the separation of only Amberlyst-15, the in situ-formed HMF and AMF were further catalytically oxidized to FDCA by air (oxygen) over homogeneous Co/Mn/Br catalysts following the free-radical chain reaction mechanism. HOAc was not only used as the solvent for the dehydration and following oxidation process but also served as the effective co-catalyst for the dehydration of fructose. The effects of catalyst species, dosage, and reaction temperature on the dehydration process and oxidation temperature on FDCA yield and purity were evaluated systematically. Under the optimized reaction conditions, a total yield of HMF and AMF of 50% and a final FDCA yield of 35% were achieved. Combined with experimental results and theoretical calculation, the reaction mechanism for fructose dehydration side reactions and the HMF and AMF oxidation reactions was proposed correspondingly. The proposed two-step, one-pot method using fructose as the starting material is a promising route for the commercial production of FDCA with the simple operation and viable yield.

Recovery of formic/acetic acid in furfural production via reactive distillation column

One-Pot Method for the Synthesis of 2,5-Furandicarboxylic Acid from Fructose: in Situ Oxidation of 5-Hydroxymethylfurfural and 5-Acetoxymethylfurfural over Co/Mn/Br Catalysts in Acetic Acid

Production of 2,5-Furandicarboxylic Acid by Optimization of Oxidation of 5-Methyl Furfural over Homogeneous Co/Mn/Br Catalysts

Liquid-Phase Aerobic Oxidation of 5-Hydroxymethylfurfural to 2,5-Furandicarboxylic Acid over Co/Mn/Br Catalyst

Concentration of Lignocellulosichydrolyzates and Removal of Furfural by Vacuum Membrane Distillation

Catalytic Decomposition of Furfural Residue with Dilute Sulfuric Acid to Produce Levulinic Acid in High Temperature Liquid Water

Concentrated HCl Catalyzed 5-(Chloromethyl)furfural Production from Corn Stover of Varying Particle Sizes

In-situ Reduction of Furfural to Furfuryl Alcohol with Hydrogen Derived from Aqueous-Phase Reforming of Methanol

Recovery of Fumaric Acid from Industrial Wastewater by Chemical Extraction and Stripping

Conversion of corn stalk into furfural using a novel heterogeneous strong acid catalyst in γ-valerolactone

An integrated lignocellulose biorefinery process: Two-step sequential treatment with formic acid for efficiently producing ethanol and furfural from corn cobs

Studies on Pretreatment of Catalytic Cracking Slurry Oil with Added Furfural

A Scalable Upgrading of Concentrated Furfural in Ethanol: Combining Meerwein–Ponndorf–Verley Reduction with in Situ Cross Aldol Condensation

Phosphotungstic acid functionalized biochar for furfural production from corncob

Integrated supercritical carbon dioxide extraction for efficient furfural production from xylose using formic acid as a catalyst

Catalytic valorization of biomass for furfuryl alcohol by novel deep eutectic solvent-silica chemocatalyst and newly constructed reductase biocatalyst

Recovery of acetic acid from waste water

Alcohol formaldehyde resin solid acid catalytic conversion of biomass into furan compounds

Extractive Fermentation for Fumaric Acid Production by Rhizopus Oryzae

Catalytic hydrolysis of corncob for production of furfural and cellulose-rich solids: Product characterization and analysis

Kinetics of Furfural Production from Corn Cob in γ-Valerolactone Using Dilute Sulfuric Acid as Catalyst