Abstract:Planar steel plates have many advantages, including high precision, flexible outline shape fabrication, and convenient transportation and storage, which make them suitable for various steel structures (e.g., reticulated shell structures). However, the steel plates are not commonly used as structural members, because they have a relatively low out-of-plane flexural stiffness. To improve the flexural buckling resistance, a novel type of built-up plate member comprising two longitudinal plates is proposed in this study. Additionally, the flexural buckling behavior of the novel built-up members is investigated. A series of compression tests on 42 specimens of built-up plate members is conducted to determine the elastic and ultimate critical loads. Flexural buckling about the minor axis is observed to be the failure mode of the specimens. The equivalent slenderness ratio method is used to determine the theoretical elastic critical loads of the specimens. With consideration of the measured material properties, geometric imperfections, and residual stresses of the specimens, a refined finite-element model is developed to simulate the flexural buckling behavior. Furthermore, the applicability of two representative specifications (American and European) to the novel built-up member is discussed. The results indicate that the design strengths calculated using these specifications are generally conservative for determining the ultimate loads of the built-up plate members. Design curve “c” in Eurocode 3 is found to be the most suitable among the specifications of interest for determining the design strength. This study provides valuable guidance for the design of built-up plate members.

Strengthening of Perforated Plates under Uniaxial Compression: Buckling Analysis

Buckling Behavior of Strengthened Perforated Plates under Shear Loading

Improving the Compression Behaviors of Perforated Plates with Slotted Holes Using Strengthening Stiffeners

Experimental Investigation into Flexural Buckling of Double-Limb Built-Up Plate Members under Compression

Design Approach of Stiffeners in Extended End Plate Connections and Finite Element Analysis

Design of Vertically Stiffened Steel Plate Walls under Combined Uniaxial Compression and Shear Loads

STIFFENER STIFFNESS AND ELASTIC BUCKLING STRESS OF STEEL PLATE SHEAR WALL

Design of horizontal stiffeners for stiffened steel plate walls in compression

ELASTIC STABILITY OF STEEL PLATE SHEAR WALL WITH CROSS STIFFENERS IN SHEAR

Demand on Stiffeners in Stiffened Extended End-Plate Connections

Elastic buckling of steel shear walls vertically stiffened by channels under axial compression

Effects of Ringed Stiffener on the Buckling Behavior of Cylindrical Shells with Cutout under Axial Compression: Experimental and Numerical Investigation

Empirical formulae assessment of ultimate strength for perforated stiffened panels under longitudinal compression

Compression Behavior of Perforated Plates in Steel Tower Anchorage Zones of Cable-Stayed Bridges

Compression tests and numerical analysis of perforated plates containing slotted holes in steel pylons

Strengthening of Perforated Walls in Cable-Stayed Bridge Pylons with Double Cable Planes

ACCESS HOLE SHAPE SELECTION AND FINITE ELEMENT ANALYSIS OF PERFORATED PLATES IN STEEL PYLONS

Test, numerical investigation and design of perforated advanced high-strength steel I-shaped built-up compression members

Research on the ultimate strength of perforated plates under axial compression

Dynamic characteristics of perforated plates with elastically restrained edges under impact loading

Geometrically Nonlinear Dynamic Response of Perforated Plates by Modified Differential Quadrature Method