Abstract:Superacid catalyst SO42--ZrO2/TiO2 was applied in esterification of Acetic Acid and Butanol. The particle size of ZrO2 in the catalyst was about 12.5 nm. In catalyst preparation conditions, the effect factor order on catalytic activity is H2SO4 concentration ＞ calcination temperature ＞ ZrO2 supported content. The optimum preparation condition is as follows: ZrO2 content 3.5g/g; calcination temperature 600℃, and H2SO4 concentration 0.5mol/L. The catalytic activity is 96.5 vol%.SO42-/MxOy solid superacid is a kind of green catalyst, whose application perspective is bright. In this paper, SO42--ZrO2/TiO2 solid superacid was prepared with nanometer compound carrying method. The acidic strength of catalysts was measured with the following Hammett indicators, 2,4-dinitrofluorobenzene (H0=-14.52) and p-nitrochlorobenzene (H0=-12.70). Catalytic activity was evaluated with esterification reaction of Acetic Acid and Butanol. Reaction temperature was at 105℃, and reaction time was only 1h. The conversion rate of Acetic Acid was analyzed by a gas chromatograph (GC-14C SHIMADZU in Japan)The experimental results showed that H2SO4 concentration had more influences on catalytic activity than other two factors, calcination temperature and ZrO2 supported content. Since sulfur absorbed on the surface of metal oxides is necessary to the acidity of SO42-/MxOy solid superacid,H2SO4 concentration in impregnation solution is needed enough high. But, it can't be too much high,otherwise, Zirconium sulfate formed on the catalyst surface will be harmful influences on catalytic activity. In researched cover, 0.5mol/L H2SO4 concentration is the most suitable, and the catalyst prepared with this concentration has very strong acidity.The optimum preparation condition is as follows: ZrO2 content 3.5g/g; calcination temperature 600℃, and H2SO4 concentration 0.5mol/L. In the catalyst prepared with above conditions, the acidic strength (H0) of the catalyst is smaller than ＜-14.52, and catalytic activity is 96.5 vol%. When it was re-used

Catalytic Synthesis of Trichloro Salicylic Acid Amyl Ester by Lanthanon Solid Superacid Gd3+-SO2-4/ZrO2

Technical Conditions of Synthesizing 5-Bromo-2-hydroxy-3-(1-propionyl) Benzoic Acid Methyl Ester

Synthesis of Salan (salalen) Ligands Derived from Binaphthol for Titanium-Catalyzed Asymmetric Epoxidation of Olefins with Aqueous H2O2

Synthesis of Acetylsalicylic Acid with Rare Earth Chloride Catalyst

A practical Ti-salen catalyst based on dimeric salen ligand for asymmetric addition of trimethylsilyl cyanide to aldehydes

Catalytic Synthesis of Ethyl Chloroacetate with Nanosized Rare Earth Composite Solid Superacid SO_4~(2-)/ZrO_2-La_2O_3

Catalytic synthesis of aspirin by trifluoromethanesulfonic acid

Preparation and Catalytic Performance of SO2-4/ZrO2-SiO2 Solid Superacid

Synthesis of 3,6-dichloro salicylic acid by Kolbe–Schmitt reaction. 2. Proton transfer mechanism for the side reaction

Preparation of Solid Acid – Activated Carbon as Catalyst in Aspirin Synthesis

Efficient synthesis of acetylsalicylic acid over Y-immobilized cation exchange resin conjoined ultrasonic collaborative method under mild conditions

Preparation of Fibrous SO42-/ZrO2-Nio Solid Acid Catalyst, Characterization and its Catalytic Properties

Synthesis of Acetylsalicylic Acid with Iodine as Catalyst

Catalysis of SO42--ZrO2/TiO2 Nanometer Solid Superacid

Synthesis of Ethyl Oleate Catalyzed by Solid Superacid SO42-/TiO2/La3+

Synthesis of acetyl salicylic acid with sodium benzoate as catalytic

Synthesis of Butyl Lactate on Magnetic Solid Superacid Catalysts

Zinc‐mediated efficient and environmentally benign synthesis of salicylate esters

Synthesis of Sec - Butyl Acetate by SnCl4/SiO2 Catalyst

Preparation of SO2-4/ZrO2-SiO2 Catalyst for Synthesis of Butyl Butyrate

Study on Catalytic Synthesis of Iso-octyl Salicylate with Nanometer Solid Superacid SO~(2-)_4/Fe_2O_3 under Microwave Irradiation