Abstract:Journal of Composite Materials, Ahead of Print. Hybridizing the natural fibers with stronger synthetic fibers could significantly improve the properties of the natural fiber-reinforced composites. The improved mechanical capabilities of fiber reinforced polymers result from the fiber's capacity for withstanding a more substantial portion of the mechanical load compared to the matrix it replaces. In order to guarantee the efficient transfer of the mechanical load from the matrix to the reinforcement, it is necessary to incorporate a fibrous filler. Transference takes place when the length of the fiber is longer than a specific critical length. Fibers which are shorter than the critical length will pull out from the matrix when tested to a tensile load. In some cases, complete transfer of the load is not performed. The goal of this study is to learn more about flax (FF), glass (GF), and mixtures of flax and glass (FF + GF) short fiber-reinforced PLA-PBS composites. This is performed to find out how the flax/glass combination affects the mechanical properties of PLA-PBS-reinforced short fiber composites. In order to extend their use for industrial applications, these composites were manufactured via extrusion and, afterward, injection molding. Fiber aspect ratios were followed after compounding and injection processing. The analysis of fiber lengths reveals a noteworthy observation: the proportion of fibers exceeding their critical length of 531 μm and 772 μm for FF and GF, respectively, is more significant when flax fibers (FF) and glass fibers (GF) are combined compared to when they reinforce the composite individually. Specifically, the composite containing both FF and GF exhibits a higher percentage of fibers surpassing their critical length, compared to their individual reinforcement in the composite. The results reveal that 27% of individually extracted single FF exceed their critical length, whereas a higher proportion, at 34%, is observed when FF is part of the composite mixture. In contrast, the critical length is surpassed by only 4% of individually extracted single GF, whereas the combined presence of GF in the composite results in a notably higher percentage, at 19%. The tensile properties of these composites were investigated considering the effect of the hybridization by flax/glass short fibers. It was noted that the tensile properties of the hybrid composites increase comparing to the flax composites from 42.4 MPa to 53 MPa for the tensile strength and from 4.9 GPa to 5.4 GPa for the tensile modulus. In contrast, the elongation at break of the hybrid composites decreases from 1.7% to 1.5% with the incorporation of glass fibers. The experimental results were compared with the predictions of the mixture law and the Cox-Krenchel model. The findings indicate that mixing synthetic fibers with natural fibers is an excellent approach to enhancing mechanical properties.

All-Plant Fiber Composites. I: Unidirectional Sisal Fiber Reinforced Benzylated Wood

Bamboo, Soybean And Corn As Resources For Green Composites

All-Plant Fibre Composites: Self Reinforced Composites Based on Sisal

Properties of Phenolic Molding Compounds Reinforced with Sisal Fiber

Novel silicon-modified phenolic novolacs and their biofiber-reinforced composites: Preparation, characterization and performance

Wood Flour-Reinforced Green Composites: Parameter Optimization via Multi-criteria Decision-Making Methods

Self-reinforced melt processable composites of sisal

Natural Vegetable Fibre/Plasticised Natural Vegetable Fibre - A Candidate for Low Cost and Fully Biodegradable Composite

Preparation of Long Sisal Fiber-Reinforced Polylactic Acid Biocomposites with Highly Improved Mechanical Performance

Effect of Fiber Modified by Alkali/polyvinyl Alcohol Coating Treatment on Properties of Sisal Fiber Plastic Composites

In situ fabrication of wood flour/nano silica hybrid and its application in polypropylene‐based wood‐plastic composites

Studies on Mechanical Properties and Morphology of Sisal Pulp Reinforced Phenolic Composites

Combining Fiber Enzymatic Pretreatments and Coupling Agents to Improve Physical and Mechanical Properties of Hemp Hurd/Wood/Polypropylene Composite

A study of the mechanical, thermal and rheological properties of sisal fiber-reinforced polylactic acid bio-composites with tributyl 2-acetylcitrate as a plasticizer

Mechanical Performances Analysis and Prediction of Short Plant Fiber-Reinforced PLA Composites

Preparation and characterization of micro/nanocellulose reinforced PVDF/wood composites

Fracture toughness and overall characterization of PLA based biocomposites with natural fibers: a comparative study.

Development and Characterization of Environmentally Friendly Wood Plastic Composites from Biobased Polyethylene and Short Natural Fibers Processed by Injection Moulding

Synergistic reinforcement of polylactic acid/wood fiber composites by cellulase and reactive extrusion

On the improvement of properties of bioplastic composites derived from wasted cottonseed protein by rational cross-linking and natural fiber reinforcement

Investigation of the hybridization effect on mechanical properties of natural fiber reinforced biosourced composites