Abstract:Constructing a rational electrode structure for supercapacitors is critical to accelerate the electrochemical kinetics process and thus promote the capacitance. Focusing on the flexible supercapacitor electrode, we synthesized a three-dimensional (3D) porous polypyrrole (PPy) film using a modified vapor phase polymerization method with the use of a porous template (CaCO3). The porous design provided the PPy film with an improved surface area and pore volume. The porous PPy film electrode was studied as a binder-free electrode for supercapacitors. It was found that the abundant interpenetrated pores created by the CaCO3 templates within the 3D framework are beneficial to overcoming the diffusion-controlled limit in the overall electrochemical process. It was revealed by electrochemical investigation that a more pseudocapacitive contribution than diffusion-controlled process contribution was observed in the total charge in the redox reaction. The galvanostatic charge/discharge (GCD) measurements showed that the optimized 3D porous PPy film electrode delivered a high capacitance of 313.6 F g–1 and an areal capacitance of 98.0 mF cm–2 at 1.0 A g–1 in a three-electrode configuration, which is nearly three times that of the dense counterpart electrode synthesized in the absence of the CaCO3 template. A specific capacitance of 62.5 F g–1 at 0.5 A g–1 and 31.1 F g–1 at 10 A g–1 was obtained in a symmetric capacitor device. In addition, the porous structure provided the PPy film with the attractive capability of accommodating the volume change during the doping/dedoping process. This is essential for the PPy film to maintain a long cycling life in a practical operation for a supercapacitor. It turned out that a high capacitance retention up to 81.3% after 10,000 GCD cycles was obtained for the symmetric supercapacitor device with the 3D porous PPy electrode (57.1% capacitive retention was observed for the dense PPy electrode). The strategy and the insight analysis are expected to provide valuable guidance for the design and the synthesis of flexible and wearable film electrodes with high performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c03553?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c03553</a>.SEM images of CaCO3 particles; digital images of the PPy-1.5 and the dense PPy films; XRD patterns of the PPy-1.5 and the dense PPy films; N2 adsorption/desorption isotherm linear plots, BJH (desorption) pore volume and pore size curves of the PPy-1.5 and the dense PPy films; linear fittings of the peak currents as a function of the scan rates in their corresponding CV curves for various electrodes; b slopes obtained from fitted results; electrochemical measurements of the dense PPy electrode; CV curves of the dense PPy symmetric device; rate performance comparison of the PPy-1.5 and the dense PPy film electrodes; equivalent circuit for the EIS fitting; fitted parameters from Nyquist; and SEM images of the PPy-1.5 film and the dense PPy film disassembled from the devices after the cycling test (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03553/suppl_file/am1c03553_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Investigation on the Capacity Getragation of Polypyrrolr Electrode As Supercapacitor

High Stability Supercapacitors Based on MXene/Spherical G-Ppy Composite Electrodes

Effect of Doping Ions on Electrochemical Capacitance Properties of Polypyrrole Films

Enhanced Capacitance of Rectangular-Sectioned Polypyrrole Microtubes As the Electrode Material for Supercapacitors

Toward a high specific power and high stability polypyrrole supercapacitors

Polypyrrole film based flexible supercapacitor: mechanistic insight into influence of acid dopants on electrochemical performance

The Enhanced Capacitance Performance of the Modified Polypyrrole with the Mixture of Carbon Nanomaterials

A Facile Strategy of Polypyrrole Nanospheres Grown on Ti3C2-MXene Nanosheets As Advanced Supercapacitor Electrodes

The synergistic effect of carbon and polypyrrole co-coating enhances the electrochemical performance of TiO 2 microspheres for high-performance supercapacitors

Pulse‐potential Electrochemistry to Boost Real‐life Application of Pseudocapacitive Dual‐doped Polypyrrole

Optimizing energy holding parameters of supercapacitor electrode configured using titanium oxide/silicon oxide nanospheres with polypyrrole intercalations

Enhanced Electrochemical Performances of Organ-Like Ti3C2 MXenes/polypyrrole Composites As Supercapacitors Electrode Materials

Structural Tuning of a Flexible and Porous Polypyrrole Film by a Template-Assisted Method for Enhanced Capacitance for Supercapacitor Applications

Polypyrrole-coated samarium oxide nanobelts: fabrication, characterization, and application in supercapacitors

Enhanced Electrochemical Performance of Polypyrrole Depending on Morphology and Structure Optimization by Reduced Graphene Oxide As Support Frameworks

Facile Synthesis of Polypyrrole Nanospheres and Their Carbonized Products for Potential Application in High-Performance Supercapacitors

An effective interaction in polypyrrole/nickel phosphide (PPy/Ni 2 P) for high-performance supercapacitor

Preparation and Characterization of Micro Polypyrrole Electrodes for Supercapacitor

Hydrothermal Synthesis of Polypyrrole/MoS2 Intercalation Composites for Supercapacitor Electrodes

Morphology Controllable Nano-Sheet Polypyrrole-Graphene Composites for High-Rate Supercapacitor.

Synthesis and Electrochemical Characterization of Nitrate-Doped Polypyrrole/Ag Nanowire Nanorods as Supercapacitors