Influencing Factors of Phosphorus Removal Performance of Constructed Wetlands Substrates

TANG Xian-qiang,LI Jin-zhong,LIU Xue-gong,HUANG Sui-liang

DOI: https://doi.org/10.3321/j.issn:1672-2043.2008.02.063

2008-01-01

Abstract:In order to analyze the factors that influenced phosphorus removal performance of constructed wetlands substrates, shale, course gravel, ironstone and hornblende were used to conduct the phosphorus isothermal adsorption experiment and indoor pilot-scale phosphorus removal research. Phosphorus isothermal adsorption experimental results indicated that substrate types and grain sizes could both influence phosphorus removal capacities. There was an order in rank for phosphorus adsorption capacities of the four substrates mentioned above: shale ironstonehornblendecourse gravel and the maximum phosphorus adsorption capacity of shale increased as the grain size of the material decreased. TP removal efficiency of indoor-pilot scale constructed wetlands with different substrates varied with hydraulic loading rate (HLA). When HLA was declined from 200 mm·d-1 to 142.8 mm·d-1, TP removal rate of course gravel bed constructed wetland increased about 10%, while hornblende bed appeared depressive trend since the substrate achieved saturated adsorption gradually. Ironstone that was maybe affected by the action of microorganisms led to the increase of TP removal rates from about 6%( HLA=200 mm·d-1) to approximately 35% (142.8 mm·d-1), owing to the release of element Fe. Shale bed was hardly affected by the change of HLA, and the TP removal rate maintained above 80% during the experimental period. These results implied that substrate types, grain size and hydraulic loading rate were the factors that influenced phosphorus removal performance of constructed wetlands substrates.