Abstract:Predicting wheel-terrain interaction with semiempirical models is of substantial importance for developing planetary wheeled mobile robots (rovers). Primarily geared toward the design of manned terrestrial vehicles, conventional terramechanics models do not provide the sufficient fidelity required for application on autonomous planetary rovers. To develop a high-fidelity interaction mechanics model, in this study the physical effects of wheel lug, slip sinkage, wheel dimension, and load are analyzed based on experimental results, including wheel sinkage, drawbar pull, normal force, and moment, which are measured on a single-wheel test bed. The mechanism of lug-terrain interaction is investigated systematically to clarify the principle of increasing shear stress, conditions of forming successive shearing among adjacent lugs, and the influence on shear displacement of soil. A mathematical model for predicting the concentrated forces and torque of rigid wheels with lugs for planetary rovers moving on sandy terrain is derived by integrating the improved models of normal and shearing stress distributions. In addition to the wheel parameters, terrain parameters, and motion state variables, wheel-terrain interaction parameters, such as the linear varying sinkage exponent, the soil displacement radius, and load effect parameters, were proposed and explicitly included in the model. In the single-wheel experiments, the slip ratio was increased approximately from 0.05 to 0.6, and the relative errors of the predicted results using the proposed model are less than 10% for all the wheels when compared with the experimental data. The proposed model has been used in the simulation of a four-wheeled rover, and its effectiveness is evaluated by comparing the simulation results with experimental results.

Kinematics Modeling And Analysis Of A Five-Wheeled Rover With Caster And Camber

Design, Modeling And Trajectory Generation Of A Kind Of Four Wheeled Omni-Directional Vehicle

Dynamics Analysis and Simulation of Unmanned Rover Steering Mechanism

Kinematic Modeling and Analysis of Novel Eight-Wheel Lunar Rover

Kinematic modeling and analysis of variable diameter wheeled lunar rover

Kinematics of Robot with Castered-and-Cambered Wheels with Respect to Drive Configuration Topology

Wheel Velocity Analysis of A Rover with Six Wheels Independently Driven on Uneven Terrain

Design and Control of TAWL-A Wheel-Legged Rover With Terrain-Adaptive Wheel Speed Allocation Capability

Kinematic Modeling of a Six-Wheeled Robotic Rover with a Passive/active Suspension

High-Fidelity Dynamic Modeling and Simulation of Planetary Rovers Using Single-Input-Multi-Output Joints with Terrain Property Mapping.

Kinematic Modeling and Hybrid Motion Planning for Wheeled-Legged Rovers to Traverse Challenging Terrains

Dynamics Modeling and Simulation of a Lunar Rover with Six Cylindrical Wheels

Kinematics modeling of eight-wheel lunar rover

Numerical method for estimation of kinematical parameters for articulated rovers on loose rough terrain

Numerical Solving Method of Kinematic Observers Estimation of Articulated Rovers on Rough Terrain

The Design And Kinematic Analysis Of A Rocker-Bogie Lunar Rover

Interaction Mechanics Model for Rigid Driving Wheels of Planetary Rovers Moving on Sandy Terrain with Consideration of Multiple Physical Effects

Model Predictive Control of a Novel Wheeled–Legged Planetary Rover for Trajectory Tracking

Research on kinematics and dynamics of lunar rover with new configuration

Quasi-Static Motion Simulation and Slip Prediction of Articulated Planetary Rovers Using a Kinematic Approach

Dynamics Simulation and Motion Capability Analysis on the Mobile System for Asymmetric Planetary Rover