Abstract:Heavy Vehicles speeds and dynamic loads are critical factors to bridge’s structure fatigue and rapid deterioration. The proposed paper addresses the modeling and simulation of dynamic loads of heavy vehicles, such as trucks and buses, on bridges and the effects of their speed on frequency response. In light of the above analysis, this paper proposes a method on how to minimize the structural vibrational of the combined vehicle and bridge system using semi-active suspension control. The vehicle dynamic load is minimized through an optimization scheme to yield an impact force with negligible bridge lateral deflection. The dynamic coupling between the vehicle and bridge are studied by examining the modes that are most likely to be excited by the vehicle speed and the roughness of the bridge surface. The models consist of a bridge and a heavy vehicle. The bridge is modeled as continuos, lightly damped beam with different supports defined by the boundary conditions. The vehicle is a multi-degree of freedom (MDOF) system undergoing motion in one plane. The methods of solution consist of a simple supported beam that closely simulates the first three beam modes of the Kishwaukee Bridge in Rockford, Illinois. The surface of the bridge generates some random excitation that serves as input to the vehicle, this is commonly known as the roughness of the bridge surface. The heavy vehicle is moving from left to right of the simply supported beam. The system is analyzed and optimized by semi-active control algorithms. Close form numerical solution is obtained by a set of second order differential equations for the bridge-vehicle system. Experimental data obtained from the vibration testing of Kishwaukee Bridge (Illinois) were collected and validated with a FEM model. Only the first three beam modes were used due to the experimental limitations and the actual structural condition of the bridge. Using MATLAB a simulation is obtained by inputting the linear time-variant equations and optimizing the system. Simulations of bridge vertical motion under different dynamic load conditions were examined and the results of bridge structure response were analyzed by comparing the effects of passive versus semi-active suspension controls. The method shows effectively how we can reduce the dynamic load force magnitude and its frequency of impact. The latter is usually associated with structural damage caused to the bridge.

Analysis on Vertical Dynamic Response of Rigid-frame Bridge and Vehicle Interaction

Dynamical Behavior of Steel Box Girder Bridges Due to Vehicle-Induced Vibration at Expansion Joint

Dynamic research on higih-pier & long-span continuous rigid frame bridge from overload vehicle

Vertical Dynamic Analysis of a Bridge During a Heavy Haul Train Passing Through

Stochastic Seismic Response Analysis of Long-span Continuous Rigid Frame Bridge

Coupling dynamic analysis of vehicle/bridge of urban mass transit continuous rigid frame bridge

Dynamic responses of a three-span continuous girder bridge with variable cross-section based on vehicle–bridge coupled vibration analysis

Vibration analysis of a multi-span continuous bridge subject to complex traffic loading and vehicle dynamic interaction

Dynamic Response Analysis of Long-Span Continuous Bridge Considering the Effect of Train Speeds and Earthquakes

Dynamic Analysis of a Coupled System of High-Speed Maglev Train and a Flexible Long-Span Continuous Rigid Frame Bridge

Research on Rigidity Limits of Bridge with Conventional Spans for Chinese High-speed Railway

Investigation of Impact Effect on Bridge in Model of Vehicle-bridge Coupled Vibration System

Effects of Heavy Vehicle Speeds on the Structure and Vibration of Bridges

Dynamic response of continuous girder bridge under moving vehicular loads

Dynamic Response Impact of Vehicle Braking on Simply Supported Beam Bridges with Corrugated Steel Webs Based on Vehicle-Bridge Coupled Vibration Analysis

VIBRATION ANALYSIS OF LONG-SPAN BRIDGE SUBJECTED TO THE ACTION OF TRAIN UNDER EARTHQUAKE

Train–Bridge Coupled Vibration of a Long-Span Steel Truss Suspension Bridge Under Complex Driving Conditions

Vehicle–bridge interaction analysis under high-speed trains

Numerical Investigation of the Vibration Performance of Elastically Supported Bridges Under a Moving Vehicle Load Based on Impact Factor

Dynamic Response of Large Span Self-anchored Suspension Bridge under Moving Vehicular Load

Vertical vibration analysis of coupled mixed vehicles and multi-span simply supported twin-line railway bridges using the moving mass beam formulation