Abstract:A series of mesoporous molecular sieve samples have been synthesized hydrothermally by using cetyltrimethylammonium bromide (CTAB) as a template, tetraethyl orthosilicate (TEOS) as a silica source, tetramethyl ammonium hydroxide as a base source and water as a solvent. The samples were prepared by adding required amount of surfactant, TEOS, water and TMAOH to maintain pH, then the obtained mixture was stirred for 10 min. and then transferred into autoclave. pH of the gel was adjusted to 10. The molar ratio of surfactant (CTAB) and TEOS was kept at 0.11:0.48, 0.165:0.48, 0.22:0.48 and 0.274:0.48 for samples A-I, A-II, A-III and A-IV respectively, while the aging time was kept 4 days and temperature remained constant at 393 K. The as-synthesized samples were thoroughly washed with distilled water and then dried at 373 K for 24 h. The as-synthesized samples were calcined at 723 K for 6 h in air. The as synthesized samples were characterized for its morphology using Field Emission Scanning Electron Microscopy (FESEM), elemental analysis by using Energy Dispersive X-Ray (EDX), thermal stability by using Thermogravimetric Analysis (TGA), the functional groups within the samples before and after calcination was analyzed using Fourier Transform Infrared Spectroscopy (FTIR). Formation of the mesoporous material depends on the surfactant, which act as a structure directing agent. Micelles of the surfactant arrange themselves and interact with the silicate ions to form the mesoporous material. In this study, the effect of concentration was studied on the synthesis and found that due to increase in concentration of surfactant, more silica polymerized and formation of material increases.

Effect of Ph in Preparation and Properties of Mesoporous Sieve from Montmorillonite

Preparation and characterization of bimodal mesoporous montmorillonite by using single template

Wet Grinding of Montmorillonite and Its Effect on the Properties of Mesoporous Montmorillonite

Preparation and characterization of mesoporous silica-pillared montmorillonite

Preparation of Monodispersed Mesoporous Silica Spheres with Tunable Pore Size and Pore-Size Effects on Adsorption of Au Nanoparticles and Urease

Influence of cations (Li+, Na+, K+)for synthesis mesoporous molecular sieve MCM-41 and their properties

Effects of Pore Size on the Photocatalytic Activity of Mesoporous TiO2 Prepared by a Sol–gel Process

Effects of acid treatment on the physico-chemical and pore characteristics of halloysite

Effect of Surfactant Concentration on the Physico-chemical Characteristics of Mesoporous Molecular Sieve

Effects of Ph on Preparation and Properties of CaTi<sub>2</sub>O<sub>4</sub>(OH)<sub>2</sub> by Hydrothermal Method

A novel mesoporous silica-clay composite and its thermal and hydrothermal stabilities

Effects of pH on Preparation and Properties of CaTi<sub>2</sub>O<sub>4</sub>(OH)<sub>2</sub> by Hydrothermal Method

The Effect of Al Content on the Pore Diameters of the Mesoporous Molecular Sieves Synthesized with Microcline as Starting Material

Effect of two-step sol-gel reaction on the mesoporous silica structure

The Synthesis Of Mesoporous Molecular Sieves

Effect of acid leaching on the microstructure and adsorption properties of ground montmorillonite powder

SYNTHESIS AND CHARACTERIZATION OF NEW MESOPOROUS MOLECULAR SIEVES

Synthesis and Functionalization of Mesoporous Zirconium(Iv) Phosphate-Phenylphosphonate with Small Mesopores

Synthesis and properties of aluminosilicate mesoporous material with adjustable pore structure

Synthesis and Pore Structural Characterization of Mesoporous Molecular Sieves SAN-01

Preparation of Mesoporous Co3O4 Nanoparticles Via Solid−Liquid Route and Effects of Calcination Temperature and Textural Parameters on Their Electrochemical Capacitive Behaviors