Abstract:To efficiently model the selective noncatalytic reduction (SNCR) process in a larger utility boiler, a decoupling numerical simulation approach, to separately treat coal combustion and SNCR NOx reduction in the furnace, was presented in this study. The simulated boiler has a full capacity of 100 MW, and the SNCR system is installed at the height of the furnace arch, mainly including groups of reagent nozzles. Urea solution was used as a reactive reagent, so that a relatively complex chemistry, along with the eddy dissipation concept (EDC) model, was introduced to accurately mimic the NOxOUT process in turbulent flow. Simulations are validated with experimental measurements. The reaction temperature, reagent amount, and reagent droplet momentum effects on the SNCR performance, primarily NOx removal and NH3 slip, were investigated in detail. The results show that, only at certain temperature regions. NOx removal gives a continuous rise with the increase of the reagent amount but commonly with a more serious NH3 slip; increasing reagent droplet momentum can be an available technique to enhance the poor global mixing between reagent droplets and flue gas in such a large furnace space. In addition, an empirical optimization of the simulated SNCR system was conducted, and potential methods to benefit SNCR system design and operation were demonstrated, such as multi-level nozzle arrangement and the application of flat atomizers.

Modeling of SNCR System in Coal-Fired Utility Boiler Based on Support Vector Machine

Modeling Research of the Reheat Steam Temperature of 300 MW Boiler Based on Support Vector Regression

Coal-fired power plant boiler combustion process modeling based on support vector machine and load data division

STUDY ON PREDICTION MODEL FOR TEMPERATURE OF FLUE GAS EXHAUSTED FROM UTILITY BOILERS BASED ON PROPERTIES OF FUEL COAL

NOx Prediction Model for Multi-coal Admixing Combustion in Boiler

Modeling NOx emissions from coal-fired utility boilers using support vector regression with ant colony optimization

Support Vector Machine Modeling on NOx Emission Property of High Capacity Power Station Boiler

Low NOx Emissions Based on Support Vector Machine and Gaussian Estimation of Distribution

Modeling and optimization of the NO X generation characteristics of the coal-fired boiler based on interpretable machine learning algorithm

Numerical Study of SNCR Process in Coal-Fired Boiler with Large Capacity

Modeling and Coordinative Optimization of Nox Emission and Efficiency of Utility Boilers with Neural Network

Nox Emission Model for Coal-Fired Boilers Using Principle Component Analysis and Support Vector Regression

Full-Scale Numerical Investigation of a Selective Noncatalytic Reduction (SNCR) System in a 100 MW Utility Boiler with Complex Chemistry and Decoupling Approach

Combining Support Vector Regression and Ant Colony Optimization to Reduce NOx Emissions in Coal-Fired Utility Boilers

Combustion Optimization for Utility Boiler Based on Least Square-support Vector Machine

LSSVM Modeling for Boiler Combustion and Denitrification Integrated System Based on Adaptive GA Variable Selection

Development of a NOx Emission Model with Seven Optimized Input Parameters for a Coal-Fired Boiler

Support Vector Machine and Genetic Algorithms to Optimize Combustion for Low Nox Emission

Multi-objective Optimization of Coal-fired Boiler Combustion Based on Nondominated Sorting Genetic Algorithm

Dynamic Modeling of NOX Emission in a 660 MW Coal-Fired Boiler with Long Short-Term Memory

An Integrative Model for Predicting the Performance of Utility Boilers