Abstract:Conductive elastomer composites (CECs) with high elasticity, flexibility and sealability of elastomers and the high electrical conductivity of conductive fillers have been widely used in electromagnetic interference shielding, microwave absorpting, stretchable electronics and sensors. To achieve high electrical conductivity, the commonly used fillers are metal powers, metal-coated inorganic particles and carbon black (CB). High filler content is usually required to effectively improve the conductivity, resulting in low elasticity, low flexibility, and poor processability, all of which limit the applications of CECs. Earlier works reported the synergistic effect of two kinds of fillers with different geometrical dimensions, among which CB and carbon nanotubes (CNTs) are two promising candidate that have been widely studied. However, CNTs are easily entangled and aggregated in elastomer matrix with low viscosity, resulting in unsatisfactory conductivity (mostly 104–105 Ω cm). Moreover, little attention has been paid on CECs with high elasticity, high electrical conductivity stability filled with low filler contents (low cost) for stretchable electronics and strain sensors. The relationship between conductive network and electrical conductivity as well as electrical conductivity stability is still not clear. In this study, we designed and prepared CB/CNTs/polymethylvinylsiloxane (PMVS) composites with good elasticity, high electrical conductivity and good electrical conductivity stability by tailoring the filler network structure of the composites with a low content of CB and CNTs in PMVS matrix. The composite with 1.8 vol% of CNTs and 1.2 vol% of CB showed high elasticity, low volume resistivity (271 Ω cm), and high electrical conductivity stability. CNTs used in this study were carbon nanotube arrays (CNTA) that were in situ synthesized on single-layered double hydroxide (LDH) nanosheets by chemical vapor deposition method. The negatively charged CNTs with a loose structure showed no physical entanglement, which can be well dissociated into many single CNTs and dispersed uniformly in PMVS matrix during mechanical shearing. The high aspect ratio of CNTs can help to obtain high conductivity at low filler content, whereas the isotropy of CB helps to rebuild up the new conductive network after tensile strain. On the other hand, these CNTs are curved in the elastomer matrix, become oriented during stretching, and can curve again after recovery, and thus act as nanosprings. The high elasticity of the CNTs nanosprings leads to high elasticity of the PMVS-CB-CNTs composites. We further studied the relationship between conductive network and electrical conductivity as well as electrical conductivity stability of PMVS-CB-CNTs composites. The results showed that CB and CNTs can form a strong dual conductive network at low filler contents, leading to a high conductivity. When stretching, CNTs act as bridges to connect CB and CB aggregations together, maintaining the strong conductive network and thus high electrical conductivity stability under tensile strain. After tensile recovery, CB and CNTs can reform a strong conductive network, leading to high electrical stability during tensile-release cycles.

Electrical Conducting Behavior of Hybrid Nanocomposites Containing Carbon Nanotubes and Carbon Black

Length-dependent Electrical and Thermal Properties of Carbon Nanotube-Loaded Epoxy Nanocomposites

The effects of carbon nanotubes on electroactive shape-memory behaviors of hydro-epoxy/carbon black composite

Microwave Properties of Carbon Nanotube/microwire/rubber Multiscale Hybrid Composites

Improving the performance of carbon/graphite composites through the synergistic effect of electrostatic self-assembled carbon nanotubes and nano carbon black

Synergistic Effect in Conductive Networks Constructed with Carbon Nanofillers in Different Dimensions

The Electrical Properties of Polymer Nanocomposites with Carbon Nanotube Fillers

Multi-wall Carbon Nanotubes Enhanced Conductive Behaviors of CB/PP Electrical Conductive Composites

Creating poly(lactic acid)/carbon nanotubes/carbon black nanocomposites with high electrical conductivity and good mechanical properties by constructing a segregated double network with a low content of hybrid nanofiller

Percolation and resistivity-temperature behaviours of carbon nanotube-carbon black hybrid loaded ultrahigh molecular weight polyethylene composites with segregated structures

Multifunctionality of Cement Based Composite with Electrostatic Self-Assembled CNT/NCB Composite Filler

High Performance Antistatic HDPE Composites with Bridging Effect of Hybrid Carbon Black and Multi‐Walled Carbon Nanotubes Fillers

A Numerical Study on Electrical Percolation of Polymer-Matrix Composites with Hybrid Fillers of Carbon Nanotubes and Carbon Black

High Electrical Conductivity of Nylon 6 Composites Obtained with Hybrid Multiwalled Carbon Nanotube/carbon Fiber Fillers

The nonlinear synergistic enhancement electric conductive effect in polymer-matrix composites containing hybrid fillers of carbon nanotubes and graphene nanoplatelets

Design and Preparation of Carbon Black/carbon Nanotubes/silicone Elastomer Composites with High Elasticity and High Electrical Conductivity Stability

Electrical conducting behaviors in polymeric composites with carbonaceous fillers

Thermal Conductivity of Natural Rubber Nanocomposites with Hybrid Fillers

Effect of Secondary Carbon Nanofillers on the Electrical, Thermal, and Mechanical Properties of Conductive Hybrid Composites Based on Epoxy Resin and Graphite

Electrically conductive polymer composite containing hybrid graphene nanoplatelets and carbon nanotubes: synergistic effect and tunable conductivity anisotropy

Electrical conductivities of high-density polyethylene composites reinforced with carbon fiber and nanometer carbon black