Abstract:：Buckling is one of the most important failure modes for thin-walled cylindrical shell structures under axial compression loads.Based on the fact that the load carrying capacity of thin-walled cylindrical shell structures under axial compression loads are very sensitive to initial imperfections, the theoretical, experimental and numerical research works done by domestic and foreign researchers for more than half a century in considering the influence of initial imperfections on the critical buckling load of axial loaded cylindrical shells are systematically reviewed.Researches have shown that two kinds of equivalent methods to consider the effects of initial imperfections have been established, namely, the deterministic approach based on numerical analysis and the non-deterministic approach under statistical probabilistic theory.Specifically, the former mainly focuses on the initial geometric imperfections, while the latter also includes non-traditional initial imperfections, such as material, thickness and loading imperfections, etc.These two methods have their own characteristics and advantages in predicting the axial load carrying capability of cylindrical shells and conducting buckling design.Compared with the test results, the highest prediction accuracy of the multiple perturbation load approach and single boundary perturbation approach can reach more than 90% and also has a certain safety margin simultaneously.Finally, some research direction and relevant urgent works in the future about the buckling problems of thin-walled cylindrical shell structures considering initial imperfection sensitivity are pointed out, which can provide some guides for related researches. Key words： thin-walled

Buckling and postbuckling behaviour of cylindrical shells under combined external pressure and axial compression

Buckling and Postbuckling of Stiffened Cylindrical Shells under Axial Compression

Postbuckling Analysis of Cylindrical Shells under Combined External Liquid Pressure and Axial Compression

Post-Buckling Analysis Of Imperfect Stiffened Laminated Cylindrical Shells Under Combined External Pressure And Axial Compression

A Boundary Layer Theory for the Buckling of Thin Cylindrical Shells under External Pressure

Buckling and postbuckling of anisotropic laminated cylindrical shells under combined axial compression and torsion

Postbuckling analysis of stiffened laminated cylindrical shells under combined external liquid pressure and axial compression

Buckling Strength of Tapered Cylindrical Shells under Partial Axial Compression: Effect of Circumferential Weld-Induced Imperfections

Buckling of cylindrical shells with general axisymmetric thickness imperfections under external pressure

Advances in Buckling Analysis of Axial Compression Loaded Thin-walled Cylindrical Shells Based on Initial Imperfection Sensitivity

Buckling of Cylindrical Shells with Arbitrary Circumferential Thickness Variations under External Pressure

Analytical Study on the Buckling of Cylindrical Shells with Arbitrary Thickness Imperfections under Axial Compression

Post- buckling Analysis Imperfect Stiffened Laminated Cylindrical Shells under Axial Compression

Buckling Behavior Analysis of Thin-Walled Cylindrical Shell Structure under Localized Axial Compression Load Based on Initial Imperfection Sensitivity

Boundary layer theory for the buckling and postbuckling of an anisotropic laminated cylindrical shell. Part I: Prediction under axial compression

Research on Buckling Load Numerical Method of Cylindrical Shells with Initial Imperfection

Buckling and postbuckling behaviors of imperfect cylindrical shells subjected to torsion

Non-linear buckling and postbuckling of shear deformable anisotropic laminated cylindrical shell subjected to varying external pressure loads

Numerical Simulation Analysis on Buckling Load of Large Combined Cylindrical Shells

Buckling of Cylindrical Shells with Measured Settlement under Axial Compression

Analytical Study on the Buckling of Cylindrical Shells with Stepwise Variable Thickness Subjected to Uniform External Pressure