Abstract:The understanding of fluid slip over a hydrophobic surface is of great importance for reducing the drag for fluid flows. Dissipative particle dynamics (DPD) is used to investigate the mechanism of fluid slip at the solid-fluid interface in microchannels. A wall model adopting three layers of frozen particles is proposed for DPD simulation. In addition, a modified bounce-forward reflection is proposed to reintroduce fluid particles back into the fluid region when they " penetrate” into the wall region in the calculation due to the soft potential employed. Then the Couette flow is simulated by using the proposed wall model. The simulation results show that the no-slip or slip of the fluid at the wall can be achieved by adjusting parameter \begin{document}$ {a_{\rm wf}}$\end{document}. The parameter \begin{document}$ {a_{wf}}$\end{document} represents the interaction between wall particles and liquid particles. Our simulation results show that the distributions of the velocity, density, temperature and shear stress compare well with the corresponding analytical solutions with \begin{document}$ {a_{\rm wf}} = 9.68$\end{document}, and there is no fluctuation of the fluid density near the wall. This indicates that the no-slip is obtained, and hence the wall is hydrophilic. With \begin{document}${a_{\rm wf}} > 9.68$\end{document}, the wall becomes hydrophobic and the fluid can slip at the wall. The wall becomes more hydrophobic with larger \begin{document}${a_{\rm wf}} $\end{document}, and the stronger hydrophobicity leads to greater slip. The slip velocity and slip length can be used to describe the fluid slip. According to the Navier slip boundary model, the slip velocity and slip length are determined by fitting a straight line (linear fitting) to the velocity profile in the central portion of the channel. The results show that the slip velocity or the slip length is a quadratic function of the parameter \begin{document}${a_{\rm wf}} $\end{document}, namely, the slip velocity or the slip length is a quadratic function of the contact angle. A physical mechanism of the fluid slip over hydrophobic surfaces is also proposed. The density profile is uniform for the no-slip condition, but there is a layer of low density fluid near the wall when the fluid can slip at the wall surface. This low density region can disrupt the momentum transfer between the wall and the fluid, which induces the fluid slip at the wall surface.

Multi‐linearity Algorithm for Wall Slip in Two‐dimensional Gap Flow

Influence of Wall Slip on the Hydrodynamic Behavior of a Two-Dimensional Slider Bearing

Modelling Slip Flow in Micro/nano Gaps with Moving Boundary

Quadratic Programming Algorithm for Wall Slip and Free Boundary Pressure Condition

Investigation into Shear Flow in Micro/Nano Gap Based on Complicated Boundary Slip

Wall Slip and Hydrodynamics of Two-Dimensional Journal Bearing

Numerical Analysis of Oil Film Flow in Micro Gap with Navier Slip Boundary Conditions

A Squeeze Flow Problem with A Navier Slip Condition

Squeeze Fluid Film of Spherical Hydrophobic Surfaces with Wall Slip

Analysis of boundary slip in a flow with an oscillating wall

The Local Slip Length and Flow Fields over Nanostructured Superhydrophobic Surfaces

Hydrodynamics of Slip Wedge and Optimization of Surface Slip Property

Effects of Viscous Heating and Wall-Fluid Interaction Energy on Rate-Dependent Slip Behavior of Simple Fluids.

Slip Length in Shear Flow Over a Textured Surface

Three-Dimensional Simulations of Anisotropic Slip Microflows Using the Discrete Unified Gas Kinetic Scheme

Nonlinear Boundary Slip of Fluid Flowing over Solid Surface

Squeeze Film Flow with Nonlinear Boundary Slip

Squeeze Flow of a Power-Law Fluid Between Two Rigid Spheres with Wall Slip

Low Friction and High Load Support Capacity of Slider Bearing with a Mixed Slip Surface

Fluid Slip over Hydrophobic Surfaces in Microchannels: a Dissipative Particle Dynamics Study

Dynamics and control of separated flow over small-scale surface deformations with slip