Abstract:Progressive collapse, where a localized member failure causes widespread structural collapse, has become a critical concern nowadays, due to its potential to cause significant financial losses and loss of human life. Triggers include natural disasters like earthquakes and floods, as well as accidents, attacks and explosions. Reinforced concrete flat slab structures, which are eminent for their architectural flexibility and have larger spans, are particularly susceptible to disproportionate collapse, due to the lack of floor beams, which can redistribute loads after a column failure, unlike moment frame buildings. This research examines how multi-story reinforced concrete flat slab buildings behave, under prescribed gravity load combinations, compared to conventional framed buildings. The effects of removing columns at specified locations from an intermediate floor of the multistorey building are also examined. However, this investigation covers both the column removal approaches to check a possibility of disproportionate collapse which are; static removal and dynamic instantaneous removal. Furthermore, the research also assesses the efficacy of perimeter beams, in minimising the risk of gradual collapse in flat slab structures, by scrutinising their ability to reduce joint displacement, chord rotation, and demand capacity ratio. ETABS v18 was used to analyze all the 18 models. The findings revealed that buildings are more prone to progressive collapse when corner columns are removed, as opposed to edge and interior columns, due to higher Demand-Capacity Ratios (DCR) and joint displacement. In comparison to dynamic analysis, the static evaluation exhibited greater DCR values and vertical joint displacement. Furthermore, since they have a more efficient load redistribution mechanism, traditional framed structures performed better than flat slab models. The simulations additionally indicated that, adding edge perimeter beams, substantially lowered the possibility of progressive collapse in flat slab structures. Moreover, the tested flat slab building models, with and without perimeter beams showed no indications of progressive collapse, when specified columns were removed from the intermediate floors, since the DCR values of the crucial columns stayed within the permissible range of 2.0. In conclusion, structures built in compliance with IS 1893:2016 code and designed to withstand seismic loads demonstrate stronger resistance against significant damage, brought about by column failures.

Influence of slabs on the progressive collapse behavior of structures

Application of Fiber Model for Progressive Collapse Analysis of Reinforced Concrete Frames *

A SIMPLIFIED SIMULATION METHOD FOR PROGRESSIVE COLLAPSE OF REINFORCED CONCRETE SLABS

Experimental Study on the Progressive Collapse Resistance of RC Slabs

Experimental Investigation of RC Beam-Slab Substructures Against Progressive Collapse Subject to an Edge-Column-removal Scenario

Experimental and modeling study on the progressive collapse resistance of a reinforced concrete frame structure under a middle column removal scenario

Experimental and theoretical analyses of the progressive collapse resistance of NSM strengthening RC frames after the failure of a corner column

Progressive Collapse and Post Impact Damage Assessment in a Regular Beam-Slab Building & Flat-Slab Building on the Intermediate Floor

Theoretical evaluation method for the progressive collapse resistance of steel frame buildings

STUDY ON THE DESIGN METHODS TO RESIST PROGRESSIVE COLLAP- SE FOR BUILDING STRUCTURES

Current Trends and Developments in Progressive Collapse Research on Reinforced Concrete Flat Plate Structures

Composite floor slab effect on seismic performance of steel-framed-tube structures with shear links

Verification and analysis on foreign progressive collapse prevention design methods of RC frame structures

Influence of Slab Spatial Composite Effect on Dynamic Behaviour of Composite Frame Structures under Earthquake Excitation

Numerical investigation on progressive collapse resistance of steel-concrete composite floor systems

Progressive collapse mode induced by slab-column joint failure in RC flat plate substructures: A new perspective

Study on the Progressive Collapse Mechanism of RC Frame Structures

Experimental investigation of progressive collapse resistance of one-way reinforced concrete beam–slab substructures under a middle-column-removal scenario

New Analytical Calculation Models for Compressive Arch Action in Reinforced Concrete Structures

Risk-based Life Cycle Cost–benefit Analysis for Progressive Collapse Design of RC Frame Structures

Influence of Horizontal Restraints on the Behaviour of Vertical Disproportionate Collapse of RC Moment Frames