Fabrication and electrocatalytic activities of porphyrin and 12-molybdophosphoric acid hybrid films.

Dawei Fan,Guobao Li,Jingcheng Hao

DOI: https://doi.org/10.1016/j.jcis.2010.04.014

IF: 9.9

2010-01-01

Journal of Colloid and Interface Science

Abstract:Self-assembled (TMPyP/PMo12)n multilayer films fabricated to have good elctrocatalytic activity for BrO3-, IO3-, and S2O82-.

What problem does this paper attempt to address?

Fabrication of Metalloporphyrin-Polyoxometalyte Hybrid Film by Layer-By-Layer Method and Its Catalysis for Dioxygen Reduction

Y Shen,JY Liu,JG Jiang,BF Liu,SJ Dong

DOI: https://doi.org/10.1002/1521-4109(200211)14:22<1557::aid-elan1557>3.0.co;2-1

IF: 3.077

2002-01-01

Electroanalysis

Abstract:Through layer-by-layer method [tetrakis(N-methylpyridyl)porphyrinato] cobalt (CoTMPyP) and polyoxometalyte were alternately deposited on 4-aminobenzoic acid (4-ABA) modified glassy carbon electrode. The resulting organic-inorganic hybrid films were characterized by cyclic voltammetry (CV), UV/visible absorption spectroscopy, and atomic force microscopy (AFM). It was proved that the multilayer films are uniform and stable. CoTMPyP-containing multilayer films exhibit remarkable electrocatalytic activity for the reduction of O-2. Rotating disk electrode (RDE) voltammetry and rotating ring-disk electrode (RRDE) voltammetry confirm that P2W18/CoTMPyP multilayer films can catalyze the four-electron almost reduction of O-2 to water in pH > 4.0 buffer solution, while SiW12/CoTMPyP multilayer films catalyze about two-electron reduction of O-2 to H2O2 in pH 1 - 6 buffer solutions. The kinetic constants for O-2 reduction were comparatively investigated at P2W18/CoTMPyP and SiW12/CoTMPyP multilayer films electrodes.
Fabrication of Cobalt Porphyrin. Electrochemically Reduced Graphene Oxide Hybrid Films for Electrocatalytic Hydrogen Evolution in Aqueous Solution.

Dekang Huang,Jianfeng Lu,Shaohui Li,Yanping Luo,Chen Zhao,Bin Hu,Mingkui Wang,Yan Shen

DOI: https://doi.org/10.1021/la501052m

IF: 3.9

2014-01-01

Langmuir

Abstract:Here we report on an experimental study of an electrocatalyst for the hydrogen evolution reaction (HER) based on cobalt porphyrin and electrochemically reduced graphene oxide (ERGO) functional multilayer films, which are prepared by the alternating layer-by-layer (LBL) assembly of negatively charged graphene oxide (GO) and positively charged [tetrakis (N-methylpyridyl) porphyrinato] cobalt (CoTMPyP) in combination with an electrochemical reduction procedure. The resulting [ERGO@CoTMPyP]n multilayer films display relatively high electrocatalytic activity and superior stability toward HER in alkaline media. Electrochemical studies indicate that CoTMPyP in the multilayer films is the active catalyst for the reduction of protons to dihydrogen.
Preparation of Hybrid Films Containing Gold Nanoparticles and Cobalt Porphyrin with Flexible Electrochemical Properties

Yan Shen,Fang Zhan,Jianfeng Lu,Bingyan Zhang,Dekang Huang,Xiaobao Xu,Yibo Zhang,Mingkui Wang

DOI: https://doi.org/10.1016/j.tsf.2013.08.002

IF: 2.1

2013-01-01

Thin Solid Films

Abstract:We report on the fabrication of hybrid films of gold nanoparticles (AuNPs) and [tetrakis (N-methylpyridyl)porphyrinato] cobalt (CoTMPyP) based on electrostatic layer-by-layer (LBL) self-assembly technique. A three-dimensional nanostructured film composed of positively charged CoTMPyP and negatively charged poly(acrylic acid)-stabilized AuNPs can be formed onto various substrates, including 4-aminobenzoic acid modified glassy carbon electrode, 11-mercaptotroponic acid modified gold film, and quartz plate with negatively charged surface. The regular growth of hybrid films is investigated by UV–vis spectroscopy, surface plasma resonance, and impedance spectroscopy. The prepared multilayer films possess flexible electro-catalytic activity toward O2 reduction reaction. It is noted that the electro-catalytic capability of the prepared multilayer film decreases as bilayer number increases. The unexpected observation of catalytic activity with bilayer number is investigated in detail.
Fabrication And Electrochemical Behavior Of Multilayer Films Containing 1 : 12 Phosphomolybdic Anions And Their Electrocatalytic Oxidation Of Ascorbic Acid

Cq Sun,Jd Zhang

DOI: https://doi.org/10.1016/S0013-4686(97)00215-6

IF: 6.6

1998-01-01

Electrochimica Acta

Abstract:A novel kind of multilayer film containing 1:12 phosphomolybdic anions was achieved on the surface of gold electrode by alternate deposition of 1:12 phosphomolybdic anions with water-soluble bipolar pyridine salt (PyC6BPC6Py). The electrochemical behavior of the multilayer films was described. The catalytic effect of the multilayer films on the oxidation of ascorbic acid was studied. (C) 1997 Elsevier Science Ltd. All rights reserved.
Nanocomposite Multilayer Film Of Preyssler-Type Polyoxometalates With Fine Tunable Electrocatalytic Activities

Mh Huang,Lh Bi,Y Shen,Bf Liu,Sj Dong

DOI: https://doi.org/10.1021/jp0494335

2004-01-01

Abstract:Through layer-by-layer (LBL) assembly technique, iron oxide (Fe3O4) nanoparticles coated by poly (diallyldimethylammonium chloride) (PDDA) and Preyssler-type polyoxometalates (NH4)(14)NaP5W30O110.31H(2)O (P5W30) were alternately deposited on quartz and ITO substrates, and 4-aminobenzoic acid modified glassy carbon electrodes. Thus-prepared multilayer films were characterized by UV-visible spectroscopy, X-ray photoelectron spectroscopy, and cyclic voltammetry. It was proved that the multilayer films are uniform and stable. And the electrocatalytic activities of the multilayer films can be fine-tuned by adjusting the assembly conditions in the LBL assembly process, such as the pH of the assembly solution. The multilayer films fabricated from P5W30 solutions dissolved in 0.1 M H2SO4 exhibit high electrocatalytic response and sensitivity toward the reduction of two substrates of important analytical interests, HNO2 and IO3- whereas the films assembled with P5W30 solutions dissolved in 1.0 M H2SO4 show remarkable electrocatalytic activity for the hydrogen evolution reaction (HER). Furthermore, the electrocatalytic properties of the HER of the latter film can be obtained from the former film upon exposure to 1.0 M H2SO4 for several hours. The high electrocatalytic activity and good stability for the HER make the P5W30-containing multilayer films potential candidates for efficient and durable hydrogen cathode material of fuel cells.
Research on the Self-Assembly of Exfoliated Perovskite Nanosheets (lanb2o7−) and Cobalt Porphyrin Utilized for the Electrocatalytic Oxidation of Ascorbic Acid

Binbin Pan,Weiqian Zhao,Xiaobo Zhang,Jinpeng Li,Jiasheng Xu,Jie Ma,Lin Liu,Dongen Zhang,Zhiwei Tong

DOI: https://doi.org/10.1039/c6ra06429a

IF: 4.036

2016-01-01

RSC Advances

Abstract:A sandwich-structured nanocomposite of LaNb2O7/CoTMPyP was fabricated via electrostatic interactions between LaNb2O7− nanosheets and cobalt porphyrin cations, and the obtained hybrid film exhibited excellent electrocatalytic activities toward AA.
Layer By Layer Self-Assembled Hybrid Thin Films of Porphyrin/polyoxometalates@Pt Nanoparticles for Photo & Electrochemical application

Dejin Zang,Zhaohui Huo,Shu Yang,Qi Li,Guoyong Dai,Mengyan Zeng,Laurent Ruhlmann,Yongge Wei

DOI: https://doi.org/10.1016/j.mtcomm.2022.103811

IF: 3.8

2022-06-14

Materials Today Communications

Abstract:Organic-inorganic hybrid films [TTMAP/Zn 4 P 4 W 30 @Pt] n and [TTMAP/Ti 12 P 8 W 60 @Pt] n were fabricated via Layer by Layer self-assembly on ITO from water-soluble meso -tetrakis(4- N,N,N -trimethylaminophenyl)porphyrin (TTMAP) and polyoxometalates (POM) stabilized platinum nanoparticles. The obtained composites NPs and the hybrid thin films [TTMAP/] n have been characterized by UV-vis spectroscopy, X-ray photoelectron spectroscopy, atomic force microscopy, quartz crystal microbalance and electrochemistry for their formation behaviour, structure composition and photo/electrochemical properties which endow them great application potential in economical energy conversion catalysis including hydrogen evolution and photocurrent generation. Under near neutral aqueous conditions, HER activity and high stability were achieved by drastically decreasing Pt loading down to 1.97 wt.% with [TTMAP/Ti 12 P 8 W 60 @Pt] n and 8.50 wt.% with [TTMAP/Zn 4 P 4 W 30 @Pt] n compared to 20 wt.% Pt/C, respectively. Furthermore, photocurrent generation was improved by up to 33% with Pt NPs loading compared to [TTMAP/POMs] n thin films. The present organic-inorganic hybrid thin film based energy conversion strategies provides a huge potential and promising approach to have low-cost hydrogen and solar energy industries.

materials science, multidisciplinary
In situ fabrication of amino acid-polyoxometalate nanoparticle functionalized ultrathin films and relevant electrochemical property study

Siheng Li,Enbo Wang,Chungui Tian,Baodong Mao,Yanli Song,Chunlei Wang,Lin Xu

DOI: https://doi.org/10.1016/j.materresbull.2007.12.012

IF: 5.6

2008-01-01

Materials Research Bulletin

Abstract:In this paper, amino acid-polyoxometalate (polyoxometalate=H3PMo12O40, H4SiW12O40, and H3PW12O40) nanoparticles functionalized ultrathin polyelectrolyte films were successfully fabricated via Layer-by-Layer (LbL) assembly technique. UV–vis absorption spectrometry was used to investigate the incorporation and reproducible growth process of the amino acid-polyoxometalate nanoparticles in the films. Fourier transform infrared spectroscopy was used to measure the composition of the ultrathin polyelectrolyte films. Transmission electron microscopy was employed to study the morphology and size of the nanoparticles in the films. Electrochemical study of the films shows that the excellent electrochemical property of the polyoxometalate remained.
Ionic Self-Assembly of Metalloporphyrin/heteropolyacid on Multi-Wall Carbon Nanotubes with Enhanced Electrocatalytic Activity Toward Oxygen Reduction Reaction

Hongsa Han,Ziwei Cao,Yunlong Zhang,Jiaqi Qin,Yujiang Song

DOI: https://doi.org/10.1142/s1088424619500123

2019-01-01

Journal of Porphyrins and Phthalocyanines

Abstract:We report the synthesis of a series of hybrid electrocatalysts toward oxygen reduction reaction (ORR) by ionic self-assembly of positively charged Fe(III) meso-tetra([Formula: see text]-methyl-4-pyridyl)porphyrin (FeP) with negatively charged H3PMo[Formula: see text]O[Formula: see text] (PMo[Formula: see text] in ethanol solution under ambient conditions in the presence of suspended multi-wall carbon nanotubes (MWCNTs). Self-assembled FeP/PMo[Formula: see text] was well-dispersed on MWCNTs with a tunable loading from 26.3% to 55.6%. Interestingly, the hybrid electrocatalysts demonstrated a much higher ORR activity than individual PMo[Formula: see text] and FeP in acidic media. We speculate that this activity enhancement might originate from a possible synergy between PMo[Formula: see text] and FeP. This study may be extended to the design and synthesis of other types of hybrid electrocatalysts for applications in electrochemical energy conversion, storage and sensing.
Alternate assemblies of platinum nanoparticles and metalloporphyrins as tunable electrocatalysts for dioxygen reduction.

Minghua Huang,Yong Shao,Xuping Sun,Hongjun Chen,Baifeng Liu,Shaojun Dong

DOI: https://doi.org/10.1021/la048337s

2005-01-01

Abstract:Through electrostatic layer-by-layer (LBL) assembly, negatively charged citrate-stabilized platinum nanoparticles (PtNPs) and positively charged [tetrakis(N-methylpyridyl)porphyrinato] cobalt were alternately deposited on a 4-aminobenzoic acid-modified glassy carbon electrode and also on indium tin oxide substrates, directly forming the three-dimensional nanostructured materials. Thus-prepared multilayer films were characterized by UV--visible spectroscopy, surface plasmon resonance (SPR) spectroscopy, atomic force microscopy (AFM), and cyclic voltammetry. Regular growth of the multilayer films is monitored by UV--visible spectroscopy and SPR spectroscopy. AFM provides the morphology of the multilayer films. The PtNPs containing multilayer films exhibit high electrocatalytic activity for the reduction of dioxygen with high stability. Rotating disk electrode voltammetry and rotating ring-disk electrode voltammetry demonstrate that the PtNP-containing multilayer films can catalyze an almost four-electron reduction of O(2) to H(2)O in an air-saturated 0.5 M H(2)SO(4) solution. Furthermore, the electrocatalytic activity of the films could be further tailored by simply choosing different cycles in the LBL process or more specifically the amount of the assembly components in the films. The high electrocatalytic activity and good stability for dioxygen reduction make the PtNP-containing multilayer films potential candidates for the efficient cathode material in fuel cells.
Fabrication Of Multilayer Film Electrode Containing 12-Tungstosilicate Anions And Its Electrocatalytic Reduction For Dioxygen

Changqing Sun,Jidong Zhang

IF: 9.1

1997-01-01

Chinese Chemical Letters

Abstract:A novel multilayer film electrode containing 12-tungstosilicate anions was achieved on the surface of gold electrode by alternating deposition of 12-tungstosilicate anions with 60% quaternized poly(4-vinylpyridine) based on electrostatic interaction. The chemically-modified electrode exhibits a high catalytic activity towards the electroreduction of molecular oxygen.
In Situ Fabrication of Porous Mos2 Thin-Films As High-Performance Catalysts for Electrochemical Hydrogen Evolution

Zhiyi Lu,Haichuan Zhang,Wei Zhu,Xiaoyou Yu,Yun Kuang,Zheng Chang,Xiaodong Lei,Xiaoming Sun

DOI: https://doi.org/10.1039/c3cc44143a

IF: 4.9

2013-01-01

Chemical Communications

Abstract:Amorphous MoS2 porous thin films (denoted as MoS2 PTFs) with high activity towards hydrogen evolution reaction (HER) were fabricated by in situ sulfuration of a Mo substrate. A small overpotential (~120 mV) and a low Tafel slope (~41 mV dec(-1)) can be observed and their excellent performance was ascribed to the combination of the amorphous feature, porous structure and optimized thickness.
Electrochemical Behavior and Its Electrocatalytic Activity of A P-Mo Heteropolyanion Modified ITO Electrode

XF Qiu,JZ Xu,JJ Zhu,HY Chen

2002-01-01

Abstract:A new method for the preparation of an organic-inorganic composite film of the heteropolyanion has been developed by modifying P(Mo2O7)(6)(-7) to the indium tin oxide (ITO) electrode surface. The modified electrode displayed a strong catalytic activity towards the reduction of IO3-. In the range of 1.0x10(-6)similar to5x10(-4) mol/L, the catalytic current was linear proportional to the IO3- concentration.
In-situ fabrication of MOF@CoP hybrid bifunctional electrocatalytic nanofilm on carbon fibrous membrane for efficient overall water splitting

Xiaoming Cui,Liguang Lin,Ting Xu,Junjie Liu,Mi Tang,Zhengbang Wang

DOI: https://doi.org/10.1016/j.ijhydene.2023.10.066

IF: 7.2

2023-10-19

International Journal of Hydrogen Energy

Abstract:Construction of metal-organic framework@cobalt phosphide (MOF@CoP) hybrid materials with enriched structures and excellent synergistic electrocatalytic properties for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is still highly desirable. Herein, a new series of Co-MOF@CoP hybrid nanofilms with controllable content ratio are successfully fabricated on carbon fibrous membrane (CFM) for electrocatalytic overall water splitting. Multiple characterization techniques verify the partial phosphorization of Co-MOF to CoP for an unique hybrid structure, where the remained Co-MOF with an interconnected porous structure not only provides efficient and fast channels for reactants/products transportation but also stabilizes the resulted CoP species in Co-MOF with an intimate interaction. As a result, the optimized Co-MOF@CoP@CFM catalyst exhibits remarkable electrocatalytic activity both for HER and OER, which only requires a voltage of 1.58 V to achieve the current density of 10 mA cm −2 for the overall water splitting. The results provide some inspiration for the design and construction of advanced porous nanofilm catalysts.

energy & fuels,electrochemistry,chemistry, physical
Nanobundles of Iron Phosphide Fabricated by Direct Phosphorization of Metal-Organic Frameworks As an Efficient Hydrogen-Evolving Electrocatalyst.

Ruo Zhao,Song Gao,Yingxiao Wu,Zibin Liang,Hao Zhang,Wei Xia,Shuai Li,Yusheng Zhao,Ruqiang Zou

DOI: https://doi.org/10.1002/chem.201904280

2019-01-01

Chemistry

Abstract:Transition-metal-based phosphides (TMPs) have been considered as attractive electrocatalysts for water splitting due to their earth-abundance and remarkable catalytic activity. As a representative type of precursors, metal-organic frameworks (MOFs) provide ideal plateaus for the design of nanostructured TMPs. In this work, the hierarchically structured iron phosphide nanobundles (FeP-500) were fabricated by one-step phosphorization of an iron-based MOF (MET(Fe)) precursor. The derived FeP-500 nanobundles were constructed by quasi-paralleled one-dimensional nanorods with uneven surface, which provided channels for electrolyte penetration, mass transport, and effective exposure of active sites during the water-splitting process. With the addition of conductive Super P, the obtained FeP-500-S exhibited a good electrocatalytic performance towards the hydrogen evolution reaction in alkaline electrolyte (1 mol L-1 KOH). Furthermore, to investigate the influence of secondary metal doping, a series of isoreticular MOF precursors and bimetallic TMPs were fabricated. The results indicated that the catalytic performance is structure dominated.
Electrochemistry of heteropolyanions in coulombically linked self-assembled monolayers

Shaoqin Liu,Zhiyong Tang,Aili Bo,Erkang Wang,Shaojun Dong

DOI: https://doi.org/10.1016/S0022-0728(98)00363-5

IF: 4.598

1998-01-01

Journal of Electroanalytical Chemistry

Abstract:A composite film containing heteropolyanion was fabricated on gold by attaching the Keggin-type heteropolyanion, PMo12O403−, on a 4-aminothiophenol SAM via Au–S bonding. Reflection FTIR, cyclic voltammetry and XPS were used for the characterization of the composite film. Reflection FTIR studies indicate that there is some Coulombic interaction between PMo12O403− and the surface amino group in the composite film, which greatly improves the film stability and prevents effectively the destructive intermolecular aggregation. The composite film shows three reversible redox couples within the pH range pH≤7.0, attributed to three two-electron and two-proton electrochemical reduction–oxidation processes of PMo12O403−. Compared with PMo12O403− in the solution, the PMo12O403− of the composite film electrode can exist in a larger pH range, and shows smaller peak-to-peak separation, and more reversible reaction kinetics. Moreover, the composite film obtained shows a good catalytic activity for the reduction of BrO3−.
Fabrication of A Multilayer Film Electrode Containing Quaternized Poly(4-Vinylpyridine) Complexed with [os(bpy)(2)ci](+/2+) and Its Electrocatalytic Oxidation of L-Cysteine

CQ Sun,S Qin,YJ Luo

DOI: https://doi.org/10.1002/(sici)1521-4109(199911)11:16<1236::aid-elan1236>3.0.co;2-y

IF: 3.077

1999-01-01

Electroanalysis

Abstract:A novel multilayer film containing quaternized poly(4-vinylpyridine) complexed with [Os(bpy)(2)CI](+/2+)(POs) was achieved on the surface of glassy carbon electrode modified with branched poly(ethylenimine)(PEI) by alternate deposition of POs with sodium poly(styrenesulfonate)(PSS). The electrochemical behavior of the multilayer film electrode is described. The catalytic effect of the multilayer film electrode on the oxidation of L-cysteine is studied.
Self-assembly of polyoxometalate-thionine multilayer films on magnetic microspheres as photocatalyst for methyl orange degradation under visible light irradiation.

Hongfang Li,Shuiying Gao,Minna Cao,Rong Cao

DOI: https://doi.org/10.1016/j.jcis.2012.12.005

IF: 9.9

2013-01-01

Journal of Colloid and Interface Science

Abstract:(PW12–TH)n multilayer films (PW12=PW12O403-, TH=thionine) were deposited successfully on core–shell structured Fe3O4@SiO2 magnetic microspheres through layer-by-layer (LbL) self-assembly method. The physical and photocatalytic properties of such magnetic microspheres coated with (PW12–TH)n films have been characterized by SEM, FTIR, and UV–vis spectra. The microspheres exhibit better photocatalytic activity toward the degradation of methyl orange (MO) under visible light irradiation than the quartz slides support. In addition, the use of magnetic support guarantees facile, clean, fast, and efficient separation of the photocatalyst after the degradation of MO. Such catalysts can be reused several times and display good reproducibility by magnetic separation.
Electrosynthesis of Transition Metal Coordinated Polymers for Active and Stable Oxygen Evolution

Xiao Wang,Fangming Liu,Hongye Qin,Jinhan Li,Xijie Chen,Kuiming Liu,Tete Zhao,Wanling Yang,Meng Yu,Guilan Fan,Fangyi Cheng

DOI: https://doi.org/10.1002/anie.202409628

2024-07-08

Abstract:Transition metal coordination polymers (TM-CP) are promising inexpensive and flexible electrocatalysts for oxygen evolution reaction in water electrolysis, while their facile synthesis and controllable regulation remain challenging. Here we report an anodic oxidation-electrodeposition strategy for the growth of TM-CP (TM=Fe, Co, Ni, Cr, Mn; CP=polyaniline, polypyrrole) films on a variety of metal substrates that act as both catalyst supports and metal ion sources. An exemplified bimetallic NiFe-polypyrrole (NiFe-PPy) features superior mechanical stability in friction and exhibits high activity with long-term durability in alkaline seawater (over 2000 h) and anion exchange membrane electrolyzer devices at current density of 500 mA cm-2. Spectroscopic and microscopic analysis unravels the configurations with atomically distributed metal sites induced by d-π conjugation, which transforms into a mosaic structure with NiFe (oxy)hydroxides embedded in PPy matrix during oxygen evolution. The superior catalytic performance is ascribed to the anchoring effect of PPy that inhibits metal dissolution, the strong substrate-to-catalyst interaction that ensures good adhesion, and the Fe/Ni-N coordination that modulates the electronic structures to facilitate the deprotonation of *OOH intermediate. This work provides a general strategy and mechanistic insight into building robust inorganic/polymer composite electrodes for oxygen electrocatalysis.
Assembly of Multilayer Films Containing Iron(iii)-Substituted Dawson-type Heteropolyanions and Its Electrocatalytic Properties: Cyclic Voltammetry, Electrochemical Impedance Spectroscopy and UV-Vis Spectrometry

SY Zhai,SY Gong,JU Jiang,SJ Dong,JH Li

DOI: https://doi.org/10.1016/s0003-2670(03)00424-0

IF: 6.911

2003-01-01

Analytica Chimica Acta

Abstract:Ultrathin multilayer films have been prepared by means of alternate adsorption of iron(III)-substituted heteropolytungstate anions and a cationic redox polymer on the 4-aminobenzoic acid modified glassy carbon electrode surface based on electrostatic layer-by-layer assembly. Cyclic voltammetry, electrochemical impedance spectroscopy and UV-Vis absorption spectrometry have been used to easily monitor the uniformity of thus-formed multilayer films. Especially, the electrochemical impedance spectroscopy is successfully used to monitor the multilayer deposition processes and is a very useful technique in the characterization of multilayer films because it provides valuable information about the interfacial impedance features. All these results reveal regular film growth with each layer adsorption. The resulting multilayer films can effectively catalyze the reduction of H2O2, NO2− and BrO3−.

Fabrication and electrocatalytic activities of porphyrin and 12-molybdophosphoric acid hybrid films.

Fabrication of Metalloporphyrin-Polyoxometalyte Hybrid Film by Layer-By-Layer Method and Its Catalysis for Dioxygen Reduction

Fabrication of Cobalt Porphyrin. Electrochemically Reduced Graphene Oxide Hybrid Films for Electrocatalytic Hydrogen Evolution in Aqueous Solution.

Preparation of Hybrid Films Containing Gold Nanoparticles and Cobalt Porphyrin with Flexible Electrochemical Properties

Fabrication And Electrochemical Behavior Of Multilayer Films Containing 1 : 12 Phosphomolybdic Anions And Their Electrocatalytic Oxidation Of Ascorbic Acid

Nanocomposite Multilayer Film Of Preyssler-Type Polyoxometalates With Fine Tunable Electrocatalytic Activities

Research on the Self-Assembly of Exfoliated Perovskite Nanosheets (lanb2o7−) and Cobalt Porphyrin Utilized for the Electrocatalytic Oxidation of Ascorbic Acid

Layer By Layer Self-Assembled Hybrid Thin Films of Porphyrin/polyoxometalates@Pt Nanoparticles for Photo & Electrochemical application

In situ fabrication of amino acid-polyoxometalate nanoparticle functionalized ultrathin films and relevant electrochemical property study

Ionic Self-Assembly of Metalloporphyrin/heteropolyacid on Multi-Wall Carbon Nanotubes with Enhanced Electrocatalytic Activity Toward Oxygen Reduction Reaction

Alternate assemblies of platinum nanoparticles and metalloporphyrins as tunable electrocatalysts for dioxygen reduction.

Fabrication Of Multilayer Film Electrode Containing 12-Tungstosilicate Anions And Its Electrocatalytic Reduction For Dioxygen

In Situ Fabrication of Porous Mos2 Thin-Films As High-Performance Catalysts for Electrochemical Hydrogen Evolution

Electrochemical Behavior and Its Electrocatalytic Activity of A P-Mo Heteropolyanion Modified ITO Electrode

In-situ fabrication of MOF@CoP hybrid bifunctional electrocatalytic nanofilm on carbon fibrous membrane for efficient overall water splitting

Nanobundles of Iron Phosphide Fabricated by Direct Phosphorization of Metal-Organic Frameworks As an Efficient Hydrogen-Evolving Electrocatalyst.

Electrochemistry of heteropolyanions in coulombically linked self-assembled monolayers

Fabrication of A Multilayer Film Electrode Containing Quaternized Poly(4-Vinylpyridine) Complexed with [os(bpy)(2)ci](+/2+) and Its Electrocatalytic Oxidation of L-Cysteine

Self-assembly of polyoxometalate-thionine multilayer films on magnetic microspheres as photocatalyst for methyl orange degradation under visible light irradiation.

Electrosynthesis of Transition Metal Coordinated Polymers for Active and Stable Oxygen Evolution

Assembly of Multilayer Films Containing Iron(iii)-Substituted Dawson-type Heteropolyanions and Its Electrocatalytic Properties: Cyclic Voltammetry, Electrochemical Impedance Spectroscopy and UV-Vis Spectrometry