Abstract:Biomass carbon-coated and pseudocapacitance-assisted α-Fe2O3 has recently gained more attention for enhanced lithium storage performance. Herein, we used a waste poplar branch as a biotemplate and a carbon source to prepare graphitic-C-doped mesoporous α-Fe2O3 (α-Fe2O3/C) through a simple immersion–carbonization–calcination method. The influence of carbon content on both the microstructures and electrochemical properties was also studied. The product calcined in air at 400 °C (Fe2O3/C400) presents a hierarchically tubular structure with cross-linkage of 18% graphitic-C and α-Fe2O3 nanoparticles with an average size of ∼28 nm. Meanwhile, the Fe2O3/C400 nanomaterial exhibits a large surface area of 114 m2 g–1 and mesopore size distribution centered at 2 nm. As lithium-ion battery anode material, such a unique hierarchical structure presents a certain pseudocapacitance behavior, thus improving its lithium storage performance. Electrochemical measurements show that the Fe2O3/C400 nanomaterial exhibits higher specific capacity and better rate performance. Especially, it can retain a capacity of 885 mA h g–1 at 1 A g–1 after cycling 1400 times, indicating good capacity retention and long-cycling stability. The good electrochemical performance mainly originates from the synergism of the unique microstructure of the Fe2O3/C400 nanomaterial, suitable doping of graphitic-C, and certain pseudocapacitance behavior. Thus, the low-cost bifunctional biotemplate strategy can provide a useful experience for the massive synthesis of pseudocapacitance-assisted high-performance anodes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.1c00649?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.1c00649</a>.Material characterization, assembly and electrochemical test of half-cells; XPS spectra of Fe2O3/C450 (Figure S1); N2 adsorption–desorption isotherm and pore size distribution of Fe2O3/C450 (Figure S2); long-cycling discharge performance of the Fe2O3/C400 electrode at 3.0 A g–1 (Figure S3); TG curve in air, XRD pattern, and cyclic performance of Fe2O3/C400-1 h electrode at 1.0 A g–1 (Figure S4); Li+-ion diffusion coefficient (Figure S5); TEM images of Fe2O3/C400 and Fe2O3/C450 electrodes before and after cycling 1000 times (Figure S6); and comparison of long cycle performance of carbon-doped Fe2O3 composites (Table S1) (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.1c00649/suppl_file/an1c00649_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Carbon Anode Material Formed from Template Molecules Occluded in a Magnesium-Substituted Aluminophosphate

Controlled Synthesis of Ultrafine β-Mo2C Nanoparticles Encapsulated in N-Doped Porous Carbon for Boosting Lithium Storage Kinetics

Graphitic Carbon-Doped Mesoporous Fe 2 O 3 Nanoparticles for Long-Life Li-Ion Anodes

Mo-Doped SnO2 Nanoparticles Embedded in Ultrathin Graphite Nanosheets as a High-Reversible-Capacity, Superior-Rate, and Long-Cycle-Life Anode Material for Lithium-Ion Batteries

Biomass Alginate Derived Oxygen-Enriched Carbonaceous Materials with Partially Graphitic Nanolayers for High Performance Anodes in Lithium-Ion Batteries

MoO2 Nanobelts Modified with an MOF-derived Carbon Layer for High Performance Lithium-Ion Battery Anodes

Carbon-coated SnO 2@C with hierarchically porous structures and graphite layers inside for a high-performance lithium-ion battery

Hexaphosphate-Derived Phosphorus-Functionalized Carbon for Lithium-Ion Battery Anode

Advanced Liti2(Po4)(3)@N-Doped Carbon Anode for Aqueous Lithium Ion Batteries

Surface Modifications of Carbon Materials Used As Anode of Lithium Ion BatteryⅡ.The Carbon Material with Core Shell Structure and Its Positive Effect on Cell Performance of Graphite Anode

Dopamine-Derived Graphite-Like Hard Carbon Materials for High-Performance Li+ Ions Storage

Investigation of Ordered Mesoporous Carbon@mno Core–shell Nanospheres As Anode Material for Lithium-Ion Batteries

Transition Metal Assisted Synthesis of Tunable Pore Structure Carbon with High Performance As Sodium/lithium Ion Battery Anode

Nitrogen and Phosphorus Codoped Porous Carbon Framework As Anode Material for High Rate Lithium-Ion Batteries

High Performance Li 2 ZnTi 3 O 8 @C Anode Material Fabricated by a Facile Method Without an Additional Carbon Source

Porous Carbon with Alumina Coating Nanolayer Derived from Biomass and the Enhanced Electrochemical Performance As Stable Anode Materials.

Surface modification of graphite anode in lithium ion battery

Facile synthesis of hollow stalagmite-like N, S-doped C and its capacity attenuation mechanism as anodes in K-ion batteries

Microporous Carbon Derived from Pinecone Hull As Anode Material for Lithium Secondary Batteries

Metal organic framework derived Co3O4/Co@N–C composite as high-performance anode material for lithium-ion batteries

Phosphorus-doped Carbon As Cathode Material for High Energy Nonaqueous Li-O2 Batteries