Abstract:Magnetic invisible cloaking has been previously demonstrated but only limited to objects with rotational geometries either in spherical or cylindrical shapes, for which the classic analytical bilayer scheme could be strictly applied to design the hiding coat. In this work, we show that a quasi-static cloaking effect could be achieved for irregular objects, e.g., metals with sharp edges, using a numerical optimization scheme. In the quasi-static limit, it is unambiguously proved that the disturbance of the irregular geometries could be well compensated by the inhomogeneous distribution of the soft ferromagnetic (FM) layer either in permeability values or in shapes under the framework of a bilayer cloak. An FM mesh coat with a constant thickness of 0.5 mm was successfully engineered to meet the specific requirements. Experimentally, good cloaking performance with a field disturbance of less than 0.5% has been achieved for a 2 × 2 × 5 cm3 brass bar in a wide frequency range from ∼10 to 250 kHz. A commercial metal scanner was also applied to verify the practical potential. The general strategy to hide almost arbitrary objects was discussed in the end. In principle, the numerical conformal coat engineered by the composite material proposed here could be broadly extended for objects with various geometries.

External cloak with homogeneous material

Homogeneous Anisotropic Dielectric Invisibility Carpet Cloak Made of Al2o3 Plates

Design of diamond-shaped transient thermal cloaks with homogeneous isotropic materials

A Multi-Cloak Bifunctional Device

Experimentally Demonstrated A Unidirectional Electromagnetic Cloak Designed by Topology Optimization

Ultrathin Conformal Magnetic Invisible Cloak for Irregular Objects.

Broadband three-dimensional diamond-shaped invisible cloaks composed of tetrahedral homogeneous blocks

Distributed external cloak without embedded antiobjects.

Three-dimensional polyhedral invisible cloak consisting of homogeneous materials

Homogenous isotropic invisible cloak based on geometrical optics.

Two Dimensional Irregular Polygonal Cloaks

Complementary Cloak Based on Conventional Cloak with Axial Symmetrical Cloaked Region

Multifunctional Complementary Cloak with Homogeneous Anisotropic Material Parameters

One-Directional Perfect Cloak Created with Homogeneous Material

A Unidirectional TM-Wave Cloak with Full Parameters

Design of Transparent Cloaks with Arbitrarily Inner and Outer Boundaries

Design and Study of Elliptical Cylinder External Cloak Based on Line-Transformation

Designing the Coordinate Transformation Function for Non-Magnetic Invisibility Cloaking

Hiding inside an arbitrarily shaped metal pit using homogeneous metamaterials

An Arbitrary-Shaped Acoustic Cloak with Merits Beyond the Internal and External Cloaks

Thermally hiding an object inside a cloak with feeling