Abstract:3D ultrasound is a promising imaging modality for clinical diagnosis and treatment monitoring. Its cost is relatively low in comparison with CT and MRI, no intensive training and radiation protection is required for its operation, and its hardware is movable and can potentially be portable. In this study, we developed a portable freehand 3D ultrasound imaging system for the assessment of musculoskeletal body parts. A portable ultrasound scanner was used to obtain real-time B-mode ultrasound images of musculoskeletal tissues and an electromagnetic spatial sensor was fixed on the ultrasound probe to acquire the position and orientation of the images. The images were digitized with a video digitization device and displayed with its orientation and position synchronized in real-time with the data obtained by the spatial sensor. A program was developed for volume reconstruction, visualization, segmentation and measurement using Visual C++ and Visualization toolkits (VTK) software. A 2D Gaussian filter and a Median filter were implemented to improve the quality of the B-scan images collected by the portable ultrasound scanner. An improved distance-weighted grid-mapping algorithm was proposed for volume reconstruction. Temporal calibrations were conducted to correct the delay between the collections of images and spatial data. Spatial calibrations were performed using a cross-wire phantom. The system accuracy was validated by one cylinder and two cuboid phantoms made of silicone. The average errors for distance measurement in three orthogonal directions in comparison with micrometer measurement were 0.06±0.39, −0.27±0.27, and 0.33±0.39 mm, respectively. The average error for volume measurement was −0.18%±5.44% for the three phantoms. The system has been successfully used to obtain the volume images of a fetus phantom, the fingers and forearms of human subjects. For a typical volume with 126×103×109 voxels, the 3D image could be reconstructed from 258 B-scans (640×480 pixels) within one minute using a portable PC with Pentium IV 2.4 GHz CPU and 512 MB memories. It is believed that such a portable volume imaging system will have many applications in the assessment of musculoskeletal tissues because of its easy accessibility.

Development of a Portable 3D Ultrasound Imaging System for Musculoskeletal Tissues.

Self-Adaptive Ultrasound Scanning System for Imaging Human Spine

Versatile Low-Cost Volumetric 3D Ultrasound Imaging Using Gimbal-Assisted Distance Sensors and an Inertial Measurement Unit

Wireless and Sensorless 3D Ultrasound Imaging

3D Multi-Modality Free-Hand Ultrasound Imaging for Medical Research

3-D Measurement of Body Tissues Based on Ultrasound Images with 3-D Spatial Information

3D Ultrasound Imaging of Residual Limbs With Camera-Based Motion Compensation

Design and test of a PC-based portable three-dimensional ultrasound software system Ultra3D

Fully Automatic Three-Dimensional Ultrasound Imaging Based on Conventional B-Scan

Real-Time 3D Ultrasound Imaging System Based on a Hybrid Reconstruction Algorithm

A Three-Dimensional Quasi-static Ultrasound Strain Imaging System Using A 6-Dof Robotic Arm

Six-Degree-of-Freedom Freehand 3D Ultrasound: A Low-Cost Computer Vision-Based Approach for Orthopedic Applications

A Simplified 3D Ultrasound Freehand Imaging Framework Using 1D Linear Probe and Low-Cost Mechanical Track

A Kinect-Based Automatic Ultrasound Scanning System

3D Freehand Ultrasound using Visual Inertial and Deep Inertial Odometry for Measuring Patellar Tracking

Development of a Wireless and Near Real-Time 3D Ultrasound Strain Imaging System.

Real-time freehand 3D ultrasound imaging

A software package for portable three-dimensional ultrasound imaging

Hand-held 3D Photoacoustic Imager with GPS

Correspondence - 3-D Ultrasonic Strain Imaging Based on a Linear Scanning System

Automatic Three-Dimensional Ultrasound Scanning System Based on RGB-D Camera