Abstract:Optical clocks are considered as promising candidates for redefining the second in the International System of Units. Compared with microwave clocks, optical clocks are powerful tools for the fundamental research such as the constancy of the fundamental constants, the validity of Einstein’s theory of general relativity, and the predictions of quantum electrodynamics. Recently two research groups have demonstrated the optical clocks with an unprecedented precision level of 10-18, which is two orders better than the present primary frequency standard. Using two Sr optical clocks and three Cs fountain clocks, SYRTE group has demonstrated the definition of second with optical clocks.#br#For redefining the second with optical clocks in the future, the optical clocks from the remote laboratories should have a high precision and the frequency of the optical clocks need to be transferred over a long distance, with extremely high precision. Unfortunately the conventional means of frequency transfer such as two-way satellite time and frequency transfer can reach a 10-16 level in one day which is far below the requirement for an optical clocks. Various methods have been developed to transfer optical frequency signal via optical fibers. Especially a research group from Germany has achieved a frequency transfer stability of 10-19 level in hundreds of seconds with a fiber length of 1840 km.#br#We demonstrate the recent development of optical frequency transfer over a 70-km fiber spool at National Time Service Center. The measurement shows that the compensation for the fiber noise is close to the limitation induced by the fiber delay for the Fourier frequency from 1 Hz to 250 Hz. The transfer stability (Allan deviation) of the fiber link is 1.2×10-15 in 1 s averaging time, and 1.4×10-18 in 10000 s. A preliminary test of the optical frequency transfer over a 100-km spooled fiber is achieved with a stability of roughly one order worse than the 71 km result, 5×10-15 in 1 s.#br#We demonstrate a new scheme of remote compensation for optical frequency transfer via fibers against conventional local compensation method. This new scheme has the advantage of great simplification of the local site, which can find applications in massive extension of star network. The key feature is that we transfer the mixture of the round-trip signal and local reference to the remote user’s end via an auxiliary fiber. At remote site, the fiber noise is measured and compensated by AOM2 accordingly.#br#Transfer stabilities of 13×10-15 in 1 s averaging time and 4.8×10-18 in 10000 s are achieved with the remote fiber noise compensation via a 25 km fiber spool. The demonstrated transfer stability is comparable to that obtained by the local fiber noise compensation method.#br#The future star fiber network of optical frequency transfer can benefit from this method, because the simpler local setup is required and even can be shared in the central site for multitudinous remote users.

High-Resolution Optical Frequency Dissemination on A Telecommunication Network

Cascaded Multiplexed Optical Link on a Telecommunication Network for Frequency Dissemination

Ultra-stable long distance optical frequency distribution using the Internet fiber network

Optical Amplification-Free High Baudrate Links for Intra-Data Center Communications

Cascaded optical fiber link using the Internet network for remote clocks comparison

Long-distance Frequency Transfer over an Urban Fiber Link Using Optical Phase Stabilization

Optical Frequency Transfer over 60 km Urban Telecom Fiber Link

Long-distance Ultrastable Frequency Transfer over Urban Fiber Link: Toward a European Network

Frequency and Time Transfer for Metrology and Beyond Using Telecommunication Network Fibres

Ultra-stable optical frequency dissemination on a multi-access fibre network

SI-traceable frequency dissemination at 1572.06 nm in a stabilized fiber network with ring topology

Optical frequency transfer via 146 km fiber link with 10^{-19} relative accuracy

Enabling a multifunctional telecommunications fiber optic network: Ultrastable optical frequency transfer and attosecond timing in deployed multicore fiber

Study of Optical Frequency Transfer Via Fiber

Simultaneously Precise Frequency Transfer and Time Synchronization Using Feed-Forward Compensation Technique Via 120 Km Fiber Link

High-resolution Microwave Frequency Dissemination Via 56 Km Optical Fiber Based on Microwave Phase Compensation

Développement De Liens Optiques Ultra-Stables Pour Le Transfert De Fréquences À Longues Distances

Passively stable dissemination of ultrastable optical frequency via a noisy field fiber network

Fiber-based multiple-access ultrastable frequency dissemination.

Multi-nodes Dissemination of Stable Radio Frequency with 10-17 Instability over 2000 Km Optical Fiber

High-Precision Fiber Noise Detection and Comparison over a 260 km Field Fiber Link