Abstract:Purpose This study aims to improve the tribological performance of Babbitt alloy under oil lubricant condition. Thus, the surface was treated into oleophobic state by modifying with low surface energy fluorosilane (1H,1H,2H,2H-perfluorodecyltriethoxysilane). It is believed that the oleophobic surface offered excellent wear resistance of Babbitt-based tribo-pairs. Design/methodology/approach By modifying the Babbitt alloy with low surface energy fluorosilane and measuring the oil contact angle, the wetting behavior was evaluated. Using Pin on Disk tribometer, the tribological properties of bare Babbitt and modified Babbitt were quantified. The samples after the friction test were characterized by scanning electron microscope (SEM) and the anti-wear performance was evaluated under dry and oil lubrication conditions. Findings Results showed that oil contact angle of modified Babbitt was109° which was tripled compared to that of prime surface, which indicates the oleophobic behavior was greatly improved. Under dry conditions, the friction coefficient of the modified surface with different load conditions is slightly lower than that of the bare surface, while the friction coefficient of the modified surface under lubrication conditions is significantly decreased compared to that of the bare surface. Interestingly, under low load and high load, the wear rate of the modified Babbitt alloy surface is only 1/4 and 1/3 of that of the bare surface, respectively. Originality/value The work proposed an effective method to improve the Babbitt tribological performances and will lighten future ideas for the Babbitt alloy bearing with high wear resistance, which is beneficial to improve the service life of sliding bearings and has huge promotion and application value in the manufacture of sliding bearings.

A Comparative Study of Growth Process and Tribological Behavior Between Single Component and Mixed Alkylsilane Self-Assembled Molecular Films

Investigation on growth process and tribological behavior of mixed alkylsilane self-assembled molecular films in aqueous solution

Progress in Self-assembly Mechanism and Functionalization of Films Assembled by(Poly)siloxane

Characterization and Tribological Behavior of Octadecene, Dodecene and Undecenoic Acid Films on Si Substrate

A Comparative Study of Tribological Properties Between Perfluoro and Non-Perfluoro Alkylsilane Self-Assembled Monolayers(sams)

Friction and Wear Studies of Octadecyltrichlorosilane SAM on Silicon

Tunable Water-Based Lubrication Behavior of Alkyl- and Fluoroalkyl-Silanes

Preparation and Tribological Behaviors of an Amide-Containing Stratified Self-Assembled Monolayers on Silicon Surface

Self-Assembly and Tribological Property of a Novel 3-Layer Organic Film on Silicon Wafer with Polydopamine Coating as the Interlayer

Experimental Study of Tribological Properties of Silicon-Based MEMS/NEMS Surface with Atomic Force Microscope

Friction and Wear Protection Performance of Synthetic Siloxane Lubricants

Tribological Properties Of Self-Assembled Monolayers

Tribology dependence on both structures of bulk a-C:H:Si films and transfer layer via adjustable Si content

The Effect of Physicochemical Properties of Perfluoroalkylsilanes Solutions on Microtribological Features of Created Self-Assembled Monolayers

Fabrication and Tribological Properties of Super-Hydrophobic Surfaces Based on Porous Silicon

SURFACE MORPHOLOGY AND GROWTH MECHANISM OF THE Al FILMS DEPOSITED ON LIQUID SURFACES

Molecular Structure Characteristics and Wetting Behaviors of Alkyl Binary Doped Ionic Liquids’ Thin Lubricating Films on Silicon Surfaces: Molecular Dynamics Simulations

Origin of Superlubricity in A-C:H:si Films: A Relation to Film Bonding Structure and Environmental Molecular Characteristic

Evolution of tribo-induced interfacial nanostructures governing superlubricity in a-C:H and a-C:H:Si films

Fabricating fluorosilane self-assembled molecular film on Babbitt alloy and its tribological performance

Evaluation of nano-frictional and mechanical properties of a novel Langmuir-Blodgett monolayer/self-assembly monolayer composite structure