Abstract:<p>Structural damage identification approaches relying on structural vibration shapes (VSs) have been widely developed. Among the approaches, the pseudo-force approach has attracted increasing attention during the recent decade owing to the fact that the damage-induced pseudo-force is concentrated within the damage region only and rapidly attenuates at undamaged locations. Transverse pseudo-forces (TPFs) relying on flexural VSs have been used for structural damage identification. However, the TPF approach is inapplicable to some structures governed mainly by tension and not bending, such as cables in a cable-stayed bridge, because bending effects on their flexural vibrations are much smaller compared to their tension effects. In contrast, longitudinal VSs can be useful for identifying such damages, although they are much more difficult to measure than flexural VSs. In this study, a new concept of axial pseudo-force (APF) is formulated using damage-induced perturbation in longitudinal vibration, which forms the basis of a novel damage identification approach for longitudinally vibrating structures. Unlike the TPF approach relying on transverse bending, the proposed APF approach relies on axial tension/compression. In particular, a damage index (DI) is established to indicate and locate structural damage. The multiscale analysis is integrated into the DI to enhance its robustness against environmental noise interference. A normalization strategy is further proposed to deal with unknown material and structural parameters in practical scenarios. The capability of the approach in identifying damage in longitudinally vibrating structures is analytically verified on bars with two-sided notches. The applicability of the approach is experimentally validated by identifying a two-sided notch in an aluminum bar whose longitudinal VSs were acquired through non-contact vibration measurement using a three-dimensional (3D) scanning laser vibrometer (SLV).</p>

Research Strategy and Application of Vibration-Based Non Destructive Structural Damage Detection

Detection and Quantification of Damage in Metallic Structures by Laser-Generated Ultrasonics

Review on Structural Damage Detection Based on Vibration Data

A Survey On Damage Detection Methods: Advantages And Shortages

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Structural Damage Detection Using Changes in Natural Frequencies: Theory and Applications

The State-of-the-Art on Framework of Vibration-Based Structural Damage Identification for Decision Making

Damage detection in composite structures using vibration response under stochastic excitation

Review of Vibration-Based Damage Detection and Condition Assessment of Bridge Structures Using Structural Health Monitoring

An Investigation of Structural Damage Location Based on Ultrasonic Excitation-Fiber Bragg Grating Detection

A Nonphysics-based Approach for Vibration-based Structural Health Monitoring under Changing Environmental Conditions

Challenges in Applying the Vibration-Based Damage Detection to Civil Structures

A novel structural damage identification approach using damage-induced perturbation in longitudinal vibration

Structural Damage Detection Based on Structural Macro-Strain Mode Shapes Extracted From Non-Stationary Output Responses

Vibration-based structural damage detection of long-span bridges

Damage Detection in Composite Structures Via Scanning Laser Doppler Vibrometry Using Linear and Nonlinear Ultrasonic Wave Features

A Baseline-Free Damage Detection Method for Operation Structure Based on Nonlinear Ultrasonic Guided Waves

Use of Non-Destructive Techniques in Chinese Traditional Timber Structures

Detection of VSA-based Structure Damage Identification Methods

Structural Damage Detection by Integrating Non-Negative Matrix Factorization and Relevance Vector Machines

Nonlinear Damage Localization in Structures Using Nonlinear Vibration Modulation of Ultrasonic-Guided Waves