Abstract:An improved analytical model is presented to analyze the delamination buckling of a bi-layer beam-column with a through-the-width delamination. Both the transverse shear deformation and local delamination tip deformations are taken into consideration, and two delaminated sub-layers as well as two substrates in the intact (un-delaminated) regions are modeled as individual Timoshenko beams. A deformable interface is introduced to establish the continuity condition between the two substrates in the intact regions. Consequently, a flexible joint is formed at the delamination tip, and it is different from the conventional rigid joint given in most of studies in the literature, in which the local delamination tip deformations are completely ignored. In contrast to the local delamination buckling in our previous study (Qiao et al., 2010), the present model accounts for the global deformations of the intact region in the delaminated composite beam-column, thus capable of capturing the buckling mode shape transitions from the global, to global-local coexistent, and to local buckling for asymmetric delamination as the interface delamination increases. Good agreement of the present analytical solutions with the full 2-D elastic finite element analysis demonstrates the local deformation effects around the delamination tip and verifies the accuracy of the present model. Parametric studies are conducted to investigate the effects of loading eccentricity, delaminated sub-layer thickness ratio, and interface compliance on the critical buckling load for the delaminated composite beam-column. Transitions of buckling modes from the global to local delamination buckling are also disclosed as the thickness of one sub-layer reduces from the thick sublayer to a thin film. The developed delamination buckling solution facilitates the design analysis and optimization of laminated composite structures, and it can be used with confidence in buckling analysis of delaminated composite structures. (C) 2011 Elsevier Ltd. All rights reserved.

General Analytical Solution to Bending of Composite Laminated Beams with Delaminations

Delamination analysis of composite laminates using an advanced beam theory

A Novel Beam Model for Mode-II Delamination Analysis of Composite Laminates

Buckling of Delaminated Bi-Layer Beam-Columns

Solutions of Beam-Shaped-function for Analysis of Composite Plates with Embedded Delaminations

Buckling Analysis of Bilayer Beam-Columns with an Asymmetric Delamination

Local Delamination Buckling of Laminated Composite Beams Using Novel Joint Deformation Models

Analytical method of solution on delamination in symmetrical orthogonal composite

A Semi-Analytical Method for Determining the Mode-I Delamination R-curve and Fiber Bridging Traction-Separation Law of Double-double Laminates

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

On the improved dynamic analysis of delaminated beams

Analysis of Residual Compressive Strength of Composite Laminates with Delamination

Free Vibration of Refined Higher-Order Shear Deformation Composite Laminated Beams with General Boundary Conditions

Application of a delamination model to laminated composite structures

Nonlinear Bending of Shear Deformable Anisotropic Laminated Beams Resting on Two-Parameter Elastic Foundations Based on an Exact Bending Curvature Model

Novel Bi-Layer Beam Elements for Elastic Fracture Analysis of Delaminated Composite Beams

An Extended Analytical Model for Predicting the Compressive Failure Behaviors of Composite Laminate with an Arbitrary Elliptical Delamination

A variational formulation for dynamic analysis of composite laminated beams based on a general higher-order shear deformation theory

Novel Bi-layer Beam Theories for Delamination Fracture Analysis

An analytical formulation of unidirectional composite curved beam with out-of-plane fiber waviness under bending

Vibration Analyses of General Thin and Moderately Thick Laminated Composite Curved Beams with Variable Curvatures and General Boundary Conditions