Composite Poly(dimethylsiloxane)/glass Microfluidic System with an Immobilized Enzymatic Particle-Bed Reactor and Sequential Sample Injection for Chemiluminescence Determinations

ZR Xu,ZL Fang
DOI: https://doi.org/10.1016/j.aca.2003.12.039
IF: 6.911
2004-01-01
Analytica Chimica Acta
Abstract:A three-layer poly(dimethylsiloxane) (PDMS)/glass microfluidic system for performing on-chip solid-phase enzymatic reaction and chemiluminescence (CL) reaction was used for the determination of glucose as a model analyte. A novel method for the immobilization of controlled-pore-glass based reactive particles on PDMS microreactor beds was developed, producing an on-chip solid-phase reactor that featured large reactive surface and low flow impedance. Efficient mixing of reagent/sample/carrier streams was achieved by incorporating chaotic mixer structures in the microfluidic channels. A conventional sequential injection (SI) system was adapted for direct coupling with the microfluidic system, and combined with hydrostatic delivery of reagents to achieve efficient and reproducible sample introduction at 10μl levels. A detection limit of 10μM glucose (3σ), and a precision of 3.1% RSD (n=7, 0.2mM glucose) were obtained using the SI-microfluidic-CL system integrated with a glucose oxidase (GOD) reactor. Carryover was <5% at a throughput of 20samples/h.
What problem does this paper attempt to address?