Abstract:The oxidation of the metallic particles in plasma spraying leads to poor inter-lamellar bonding and thereby lower corrosion and high temperature oxidation resistance. In this study, a novel approach is proposed to exclude the oxide of in-flight Ni-Al droplets by introducing diamond as a deoxidizer in Ni/Al powder during plasma spraying. NiAl coatings were deposited with Ni/Al/diamond composite powder prepared by mechanical alloying by atmospheric plasma spraying at different spray distances to study the effect of the diamond addition on the oxidation behavior of in-flight droplets. The results show that the oxygen content in APS NiAl coating (3.23 wt%) was significantly reduced to 0.61 wt% by adding 2 wt% diamond to the Ni/Al powder. The measurement yields particle temperatures of higher than 2200 °C. Such high temperature contributes to the in-situ deoxidizing effect of C-containing droplets, resulting in oxide-free NiAl droplets for the deposition of the coating with low oxide content. This enhances both inter-lamellar cohesion and coating-substrate adhesion. Moreover, it was found that the size effect of a molten droplet on its oxidation kinetics significantly influences deoxidizing efficiency. Smaller particles require higher diamond content to ensure the in-flight deoxidizing to form oxide-free metal droplets. The result was further confirmed theoretically by numerical simulation. The present work provides a new approach to control the in-flight oxidation of metallic elements during plasma spraying, which has significant implications for the preparation of high-performance protective metallic coatings.

Preparation of Ni-based Alloy Diamond Composite Coatings by Cold Spray

Formation of Diamond-NiCrAl Cermet Coating Through Cold Spray

Influence of Annealing on the Microstructure and Wear Performance of Diamond/NiCrAl Composite Coating Deposited Through Cold Spraying

Fabrication of cBN-NiCrAl Cermet Coating by Cold Spray

Preparation and tribological properties of novel cold–sprayed Ti–diamond composite coating

Microstructure, Mechanical Properties, and Two-Body Abrasive Wear Behavior of Cold-Sprayed 20 vol.% Cubic BN-NiCrAl Nanocomposite Coating

Multiple strengthening mechanisms of cold-sprayed cBNp/NiCrAl composite coating

Microstructure of Ni–Al Powder and Ni–Al Composite Coatings Prepared by Twin-Wire Arc Spraying

The Influence of Diamond Addition to Ni-Al Powder on Oxidation Behavior of Ni-Al During Plasma Spraying for High Performance Oxide-Free Ni-Al Intermetallic Coating

Effect of Annealing on Microstructure of Cold Sprayed C-BNp/NiCrAl Composite Coating

The Relation of Formation Mechanism, Microstructural Evolution and Mechanical Properties of Ni-based Coatings Produced via High Pressure Cold Spray Deposition

Effect of self-propagating high-temperature combustion synthesis on the deposition of NiTi coating by cold spraying using mechanical alloying Ni/Ti powder

Beneficial effects of laser irradiation on the deposition process of diamond/Ni60 composite coating with cold spray

Microstructure and Properties of FeMnCrAl/Ni Coated WC Coatings Deposited by High Velocity Arc Spraying

Formation of NiAl Intermetallic Compound by Cold Spraying of Ball-Milled Ni/Al Alloy Powder Through Postannealing Treatment

Structure and Properties of MoSi2-CoNiCrAlY Nano-composite Coating by Plasma Spraying

Oxidation protection dynamics of NiAl droplet by inflight in-situ carbon deoxidation during atmospheric plasma spraying for high performance NiAl coatings

Tribological properties of Al/diamond composites produced by cold spray additive manufacturing

The Microstructure and Deposition Behavior of NiCr Alloy Coatings Using Laminar Plasma Spraying

Thermal Stability of Microstructure and Hardness of Cold-Sprayed cBNp/NiCrAl Nanocomposite Coating

The Influence of Zirconium Carbide Addition on Oxidation Behaviour of NiAl Coatings Prepared by Cold Spraying of Ball-Milled Ni–Al Alloy Powder