Abstract:Coaxial powder feeding technology in the field of metal additive manufacturing is booming. In this paper, a new laser cladding nozzle with powder feeding channels of inner and outer rings is designed. The nozzle works with a new kind of laser, which is a new heat source with an inner beam and outer beams. The water-cooling channels are simulated in Ansys Workbench. The simulation results present the temperature distribution of the working nozzle and the velocity of the cooling water. The thermal dilation of the nozzle in the working environment is also simulated. The results show that the loop water cooling channel could effectively reduce the high temperature of the nozzle down to about 200 °C. In addition, it could well restrain the thermal deformation of the nozzle lower to 0.35 mm. The equivalent stress of most parts is controlled under 360 MPa. Then, the powder flows of the inner and outer rings of the multiple powder feeding channels are simulated in Ansys Fluent. The convergence effect of the powder flow could be assumed and some significant parameters, such as the velocity, are acquired. The results present that these multiple powder feeding channels could realize the generation and removal of removable supports of workpieces with highly complex shapes and achieve a large processing range and good processing efficiency. The velocity of the powder flow at the outlet is elevated to about 5 mm/s. Then, the thermal cladding states under the new laser heat source of the powder are simulated in Workbench. The temperature of the melting process and the thermal deformation and the equivalent stress/strain of the additive parts are obtained in the emulation. The results emerge that the powder melting range and the ascending temperature of the melting pool are improved with this effect. The greatest temperature of the melting pool is about 2900 °C in the machining process, and the maximum thermal equivalent stress is 1.1407 × 1010 Pa.

Analysis and Study on 3D Feeding Head for Laser Rapid Manufacturing

Finite Element Simulation and Analysis of Aluminum Alloy Three-Dimensional Milling

As-built FE Thermal Analysis for Complex Curved Structures in Automated Fiber Placement

Three-dimensional numerical simulation for high speed milling of aerospace aluminum alloy

Simulation of High-Speed Milling Process of Aerospace Aluminum Alloy

Numerical simulation of the three-dimensional temperature field in laser cladding forming process

Fundamental Aspects on Laser Rapid & Flexible Manufacturing of Metallic Components

Three-dimensional Thermal Analysis for Laser Assisted Machining of Ceramics Using FEA

Dynamic Analysis on Laser Forming of Square Metal Sheet to Spherical Dome

Numerical Simulation and Experimental Research on Reduction of Taper and HAZ During Laser Drilling Using Moving Focal Point

Design a New Type of Laser Cladding Nozzle and Thermal Fluid Solid Multi-Field Simulation Analysis

Geometric Properties of Steel Components with Stability and Fatigue Risks Using 3D-Laser-Scanning

System Design For Laser Assisted Milling Of Complex Parts

Optimization of Laser Cladding Forming Parameters by Numerical Simulation to Minimize the Cracking Posibilitys

3-D Transient Numerical Simulation on the Process of Laser Cladding by Powder Feeding

Temperature Field Numerical Calculation of Laser Re-melting HVOF Sprayed Cr3C2-25％ CrNi Coatings and Experiment Test

Design and Numerical Analysis of an Inside-Beam Powder Feeding Nozzle for Wide-Band Laser Cladding

Research on key problems of CAPP/CAE system of laser forming

Analytical modeling of the heat-affected zone in laser-assisted milling of AerMet100 steel

Investigation on Structural Design and Coupled Finite Element Analysis of CS 3L Feeder for ITER

Thermal Structure Design and Analysis of A Machine Tool Headstock