Abstract:The swelling of Ca-montmorillonite at elevated temperatures is important for many applications including geological disposal of radioactive waste, subsurface carbon sequestration, and shale gas exploration. However, the experimentally observed swelling behaviors of Ca-montmorillonite contacting liquid water and the temperature effects on the swelling pressure are not well understood. In this work, molecular dynamics simulations are carried out to study the swelling of Wyoming Ca-montmorillonite with a d-spacing ( d ) range of 1.40–4.00 nm at 5 MPa and various temperatures (298–500 K). The ClayFF and SPC are adopted for modeling Ca-montmorillonite and water, respectively. The simulation box is measured to be 11.15, 3.66, and 28.00 nm in the x- , y- , and z -direction. Atomistic pistons are used to control the bulk pressure of the water environment, and the implicit walls are implemented for preventing the ions from leaking from the pore into the water environment. The clay atoms are fixed during the simulation and the swelling pressure is calculated through dividing the force by the area. The equilibrium time is at least 20 ns and the production time falls in a range of 50–88 ns. The swelling pressure results show that for small d , high temperature reduces the magnitude of the oscillating curve of swelling pressure and also reduces the range of d where hydration force dominates the swelling pressure. This temperature effect is due to the weakened hydration force as evidenced from the weakened water density distributions inside the pore. For large d , high temperature reduces the swelling pressure, which is consistent with the experimental result, and increases the range of d where double layer force dominates the swelling pressure. The reduction of the swelling pressure can be explained by the enhanced ion correlation that reduces the double layer force according to the strong coupling theory, given that the calculated coupling parameters at higher temperatures are smaller. The swelling pressures are negative at elevated temperatures and large d , which prevents the clay from further swelling. However, the classical Poisson-Boltzmann (PB) equation predicts the positive double layer force since the ion correlation effect is not considered in the PB equation. Furthermore, the calculated swelling free energy curve shows that at 298 K and 5 MPa, it is difficult for Ca-montmorillonite to swell beyond a d -spacing of around 1.9 nm, which is in good agreement with the experimental result. The energy barrier for Ca-montmorillonite to swell to large d is larger than that for Na-montmorillonite, which means that it is more difficult for Ca-montmorillonite to swell to large d . This behavior is consistent with experimental observation and can be explained by the larger ion correlation effect in the Ca-montmorillonite system. These findings enhance the understanding of swelling of Ca-montmorillonite at elevated temperatures and could help to engineer better barrier materials for nuclear waste storage.

Surface Potential Dependence of the Hamaker Constant

A Molecular Dynamics Study on the Structural and Mechanical Properties of Pyrophyllite and M-Montmorillonites (M = Na, K, Ca, and Ba)

A method to quantitatively evaluate Hamaker constant using the jump-into-contact effect in Atomic Force microscopy

Temperature Dependence of the Contact Angle of Water on a Hydrophobic Surface at Pressurized Condition

Effect of Layer Charge Density on Hydration Properties of Montmorillonite: Molecular Dynamics Simulation and Experimental Study

AFM-based Hamaker Constant Determination with Blind Tip Reconstruction

Hamaker constants of iron oxide nanoparticles

Particle size effect on surface/interfacial tension and Tolman length of nanomaterials: A simple experimental method combining with theoretical

Method for the calculation of the Hamaker constants of organic materials by the Lifshitz macroscopic approach with DFT

A theoretical exploration of the influencing factors for surface potential

Nanoscale chemomechanical variations of montmorillonite induced by the specificity of counterions—An in situ XRD and AFM study

First-principles study on the effect of pressure on the adsorption of H 2 O on the Mg-montmorillonite (010) surface

The effect of patch potentials in Casimir force measurements determined by heterodyne Kelvin probe force microscopy

Extracting Hydromechanical Properties of Montmorillonite Quasi-Crystals Via Nanoindentation of Oriented Thin Films

Probing Surface Charge Potentials of Clay Basal Planes and Edges by Direct Force Measurements

Internal Forces Within the Layered Structure of Na-Montmorillonite Hydrates: Molecular Dynamics Simulation

Molecular dynamics simulation of swelling properties of Ca-montmorillonite at high temperatures

Molecular Dynamics Study of Crystalline Swelling of Montmorillonite as Affected by Interlayer Cation Hydration

Dependence of clay–water contact angle on surface charge and ambient temperature: A study from molecular dynamics perspective

Measuring the surface cohesion of calcium silicate hydrate

Effect of hydration repulsion on nanoparticle agglomeration evaluated via a constant number Monte–Carlo simulation