Abstract:Transition metal compounds based on conversion reactions are promising electrode materials for lithium‐ion batteries due to their higher lithium storage capacity compared with currently available commercial battery electrodes. Most of the studies on these materials in the literature focus on transition metal oxides and fluorides, and not much work on transition metal sulphides has been reported, partially due to their relatively poor electrochemical performance. Here, synthesis and characterization of a series of solid solution Fe x Mn 1‐ x S ( x = 0.2, 0.5, 0.8) monosulphide compounds is reported. Interestingly, hexagonal FeS and cubic MnS can form a solid solution of Fe x Mn 1‐ x S ( x < 0.57). It is demonstrated that the lithium storage voltage can be tuned by changing the Fe concentration in the Fe x Mn 1‐ x S matrix; meanwhile, the discharge‐charge coulombic efficiency and cycle stability of Fe x Mn 1‐ x S are greatly enhanced in comparison with that of pure MnS. A half cell using Fe 0.5 Mn 0.5 S as electrode material achieves a high first cycle coulombic efficiency of 78.0% and a high reversible capacity of ca. 477 mAh g −1 after 35 cycles, while for pure MnS the first cycle coulombic efficiency is only 45.9% and the capacity rapidly fades to ≈200 mAh g −1 after 15 cycles. Although the solid solution state of Fe 0.5 Mn 0.5 S cannot be retained during conversion reaction as indicated by X‐ray diffraction (XRD), X‐ray absorption spectroscopy (XAS), and transmission electron microscopy (TEM), the initial discharge “polarization”, which has been considered as one of the major hurdles for conversion reaction, can be significantly reduced by this type of material design. In addition, the size and distribution of the nucleated nanophases might also be altered by the initial solid solution state of Fe 0.5 Mn 0.5 S, contributing to the improved electrochemical performance reported here.

Hydrothermal Synthesis and Electrochemical Properties of Alpha-Manganese Sulfide Submicrocrystals As an Attractive Electrode Material for Lithium-Ion Batteries

Hydrothermal Synthesis and Electrochemical Performance of Li[sub 1.59]h[sub 0.41]mno[sub 3] As a Cathode Material for Lithium-Ion Battery

Facile Synthesis of a Hierarchical Manganese Oxide Hydrate for Superior Lithium-Ion Battery Anode

Hydrothermally synthesized MnSe as high cycle stability anode material for lithium-ion battery

Structural and electrochemical studies of α-manganese dioxide (α-MnO2)

Delicate lithium-manganese spinel LiMn2O4 of quasi-spherical morphology, obtained by hydrolysis of complex compounds, as cathode material for high-power current sources

Copper doped hollow structured manganese oxide mesocrystals with controlled phase structure and morphology as anode materials for lithium ion battery with improved electrochemical performance

Electrochemically activated spinel manganese oxide for rechargeable aqueous aluminum battery

Atomic Manganese Manipulating Polysulfide Speciation Pathway for Room-Temperature Na-S Batteries

Hydrothermal synthesis of nano spheroid‐like ZnMn 2 O 4 materials as high‐performance anodes for lithium‐ion batteries

High Performance Li-O2 Batteries Enabled with Manganese Sulfide As Cathode Catalyst

Manganese Oxide Nanosheets with Mixed Valence States as a Separator Coating for Lithium–Sulfur Batteries

Enhanced Polysulfide Trapping and Conversion by Amorphous-Crystalline Heterostructured MnO2 Interlayers for Li-S Batteries.

Synthesis and Performance of Nano MnO As an Anode Material for Lithium-Ion Batteries

Remarkably Improved Electrode Performance of Bulk MnS by Forming a Solid Solution with FeS – Understanding the Li Storage Mechanism

Rational Design of Space-Confined Mn-Based Heterostructures with Synergistic Interfacial Charge Transport and Structural Integrity for Lithium Storage

Heterostructured Microspheres of MOF-derived (zn,mn)s/c Coated Manganese Sulfide for Aqueous Zinc Ion Batteries

Hollow Carbon Nanospheres Coated by Δ-Mno2 As S Host to Enhance the Catalytic Conversion of Polysulfides in Li-S Batteries

Earth-abundant Li-ion cathode materials with nanoengineered microstructures

Facile microwave-assisted hydrothermal synthesis and improved electrochemical performance of micro rhombus ZnMn2O4 anodes for Li-ion batteries

General Synthesis of Hollow MnO2, Mn3O4and MnO Nanospheres As Superior Anode Materials for Lithium Ion Batteries